The leading supplier of cutting edge technology

Gentec-Electro Optics announce a new age in beam profiling

30 October 2007

We are pleased to announce the arrival of the Gentec-EO Beamage family of compact, portable CCD/CMOS laser beam profilers. The Beamage is USB2.0 port powered with a 3 metre cable, 4MB image buffer and on-board microprocessor. The profiler has a thin profile (29mm thickness including ND-filter) so would be ideal to fit into tight beam trains. There are several versions available; the 14-Bit high resolution CCD version with either a ˝“ (CCD12) or 2/3” (CCD23) chip, and the 10-Bit high speed-CMOS version optimized for pulsed lasers (SPEED).

Left: Gentec-EO Beamage
Right: Gentec-EO Beamage mounted on M2DU accessory

The Beamage-UCD12 with 6.3 x 4.8 mm image area has 4.65 µm square pixels so suitable for measuring >45 µm beams; the Beamage-UCD23 with larger 8.8 x 6.6 mm image area is more suitable for larger beams whilst the Beamage-SPEED with 6.5 x 4.9 mm image area enables single pulse capture to 20kHz. It is possible to fit a fibre-optic taper to all the above sensors for profiling even larger beams. The Focus I version has a 14.4 x 10.8 mm 1.6:1 taper and the Focus II a 20 x 15 mm 2.27:1 taper fitted to the sensor. The option to profile the largest beams is at the expense of the camera resolution, i.e. the effective pixel size is larger. We can also offer UV (260-380 nm) and IR (1480-1600 nm) camera options. The software features include Beam Wander & logging, Gaussian and Top Hat Fits, Logarithmic profile, Auto-Inclusion Region, Relative Power and Fluence measurements and it is possible to capture pulsed lasers using either the Auto or External trigger modes and 20,000:1 electronic auto-shutter.

It is also possible to add the M˛ measurement capability to your Gentec-EO Beamage. The fast, compact and portable M2DU accessory converts any Beamage into a compact, fully ISO 11146 compliant measurement system for quick and reliable determination of M˛.

Please contact Adrian Piddington, by email: adrianp@lambdaphoto.co.uk, or on 01582 764334 for further information regarding our Gentec-EO beam profilers.

Beamage Technical datasheet
Add M2 capability to your Beamage Camera
Full portfolio of Gentec-EO beam profilers


Latest Press Releases

  1. New Motorized Tilt & Rotation Sample Holder for Phenom Desktop SEM
  2. New NanoRam for Hand-held Chemical & Pharmaceutical Inspection
  3. AirMicro – iPad/iPhone/iPod touch microscope system
  4. Lambda appointed by CI Systems: For all your Electro-Optic Testing Needs
  5. NEW 2012 Catalogue from Navitar
  6. VeriSens – a new generation of intuitive configuration
  7. Highest performance for superior demand: LED Light Source
  8. New Infrared material measurement service from Lambda Photometrics
  9. GemRam - Quick and easy gemstone identification solution
  10. Breakthrough 3D Optical Profiler for Accurate Surface Metrology on the Production Floor
  11. StreamPix 5/TroublePix High Speed Laptop Solution
  12. Non-contact multilayer film thickness measurement made easy
  13. New Test and Laboratory Controller for LED Lighting
  14. The New ODiSI, Enabling High Resolution Strain & Temperature Measurements
  15. IMPERX 29MP Camera Shipping NOW
  16. Greenlee XL fiberTOOLS
  17. Pre-configured Glacier X mini spectrometer for fluorescence spectroscopy
  18. POSITION FILLED Graduate Internal Sales Engineer - Photonics Group
  19. A new compact high resolution Raman spectrometer – the Glacier T
  20. Measure Every Pulse with Mach 5