Schott LED lighting

Schott, a leader in the manufacture of fiber optic and LED solutions for machine vision, presents an extensive offering of cold light sources and accessories.

Schott LLS - LED Light Source

This LED light source is the ideal choice for cold illumination using an LED source. Available in white, red, green, yellow, blue, UV and IR

Accepts Schott fibre optic light heads
LED lifetime 50,000 hours
Local Control, Ethernet Control, RS-232 Control or Analog Control Modes
Fast triggered strobe capabilities
Shut down input and Fault warning output via rear connector.

Download SCHOTT LLS - LED Light Source specifications

iQLED Lights

The iQLED lightheads can be used in steady-state mode as a general-purpose area light, or in strobe mode to freeze motion, reduce exposure times and increase processing speed.

Extremely high stability through heat management

Ideal for Machine Vision

Available in red, yellow, white, green, blue, UV and IR

VisiLED Lights

The VisiLED range has been specially developed for the fields of stereo microscopy and macroscopy. The excellent electronic controllability of the LEDs allows contrasting methods that go far beyond the possibilities provided by conventional microscope illumination. Various models are available including brightfield and darkfield.

Ideal for microscopy

Structured lighting provides outstanding contrast for information on the surface and height of sample.

Click here to be directed to the Schott website

iQ421 LED Controller

The iQ421 is Schott’s top of the range LED controller. Features include:

Normal mode - allows continuous dimming of light intensity between 0 and 100 %.
Maintain mode - a light feedback loop to maintain intensity +/- 2% over operation of the LED head.
Trigger mode - with programmable delay to synchronize the unit with an external signal to extend LED lifetime and provide light only when needed.
Internal strobe generator - frequencies between 15 Hz and 50 KHz to freeze motion of periodically moving objects.

iQ121 LED Controller

A variable intensity controller with temperature control. The single-knob light intensity control adjusts from 0 to 100 %. A remote on/off function can extend LED lifetime and provide light only when needed during part inspection.