OptoTest’s new OP960 Series Optical Insertion Loss and Optical Return Loss Meters build on the well proven capabilities of the fastest RL meters in the industry, the OP940 Series, with increased speed and enhancements that make them even easier to use.

OptoTest Adapters Overview

To ensure maximum optical connector life and best possible insertion loss (IL) and return loss (RL), all fibre optic connectors must be cleaned prior to any mating.

In order to obtain accurate and repeatable results measuring insertion and return loss, the reference connector needs to outperform the connector under test. Reference cables from OptoTest are manufactured with reference ends that are certified to exceed the FOTP171A (A2.2.1) standard.

HPR Performance Reference Cables

Manta HM (stands for "high magnification") is an automated microscope for inspection of single and multi-fiber patch cords, bulkhead and transceivers, including but not limited to: MT, MPO, LC, FC, SC, CS®, E2000™, PRIZM, QSFP, ARINC, MIL Spec termini, ODC12, High-power SMA, Avim, mini-Avim and more.

The SUMIX MAX-QM+ is a white-light and phase-shift interferometer for inspection of MT, MT-RJ, MTP®/MPO (PC and APC), SMA connectors/ferrules in a single scan.

The SUMIX MAX-QS+ is a white-light and phase-shift interferometer for inspection of single fibre ST, FC, SC, LC, MU, E2000™ (PC and APC), small format multi-fibre MT-RJ (PC and APC), SMA and special connectors.

The SUMIX MAX-Quantum is a high-end automated interferometer for inspection of single and multi-fibre connectors of MTP®/MPO, ST, FC, SC, LC, MU, E2000™ types as well as MT, MT-RJ ferrules in a single scan.

OptoTest’s OP-SPHR Integrating Sphere is designed as a cost-effective solution for optical testing of fibers terminated with high-density connectors such as MTP®/MPO or bare fiber.

This Launch Condition Analyzer analyses the Nearfiled as well as the Farfield of launch cables and sources over a wide wavelength range.

OptoTest OP1100 Discontinuity Analyzer

OptoTest OP250 Stabilized Light Source

OP280 Ribbon Fibre Visual Fault Locator

Polarity Analyser designed to automatically test 24, 16, 12 or 8-way MTP/MPO ribbon cable assemblies with improved speed and efficiency

OP480-OP280 MTP/MPO and Ribbon Fibre Polarity Test System

OptoTest OP508 Optical Power Meter Module

OptoTest OP510 Optical Power Meter Module

Multichannel optical power meter with internal individual power meter modules for concurrent data acquisition with higher data acquisition rate.

OptoTest OP710-ANX Multichannel Optical to Electrical Converter

OptoTest OP712 USB Optical Power Meter

OptoTest OP715 Benchtop Stabilized Light Source

OP720 Optical Switch

OptoTest OP725 Benchtop Optical Switch

OptoTest OP725-OP940 Bidirectional Insertion Loss and Return Loss Test System

OptoTest OP735 Benchtop Optical Power Meter

OptoTest OP740 High Speed Multichannel Optical Power Meter

OptoTest OP750 Multichannel Source

OptoTest OP752-MOD Modal Conditioner

OptoTest OP815 Insertion Loss Meter

OptoTest OP815-D Dual Channel (Duplex) Insertion Loss Meter

Bi-Directional Insertion Loss Test System or multi-mode or single mode with either singlemode or multimode internal source.

OptoTest OP850 Multichannel Insertion Loss Meter

OP925 is an entry level, cost-effective IL/RL meter for simplex patch cord testing using the conventional CW reflectometry RL method (all other Optotest RL systems utilise a mandrel-free pulse reflectometry technique for added performance and dynamic range). IL is measured using the standard CW method.

OptoTest OP940 Insertion Loss and Return Loss Meter

OP940-CSW is a mandrel-free insertion loss and return loss measurement system with MTP/MPO front panel connections. Designed as a compact and user friendly tool for multichannel ribbon fibre measurements without the inconvenience of fan-out cables.

OptoTest OP940-SW Insertion and Return Loss Meter

OptoTest Corporation’s Software Suite, OPL-CLX, is a customer focused production software that provides SQL database support.

Built on the OPL-MAX measurement and computing core, OPL-LOG also supports multi channel insertion loss and return loss testing with all the same customisation.

OPL-MAX supports multi channel insertion loss and return loss testing and is ideal for facilities producing multifiber cables or more complex components.

OPL-PowerRT was designed as a simple solution for testing insertion loss on multichannel fiber optic assemblies while allowing the operator to monitor all test results simultaneously.

OPL-PRO supports serialised single channel and duplex cable testing for insertion loss and return loss.

OptoTest OPLC-KIT Launch Condition Kit

OptoTest’s Remote Head Power Meters (OPRH) create a highly adaptable fiber optic test environment when coupled with a supporting mainframe (eg OP940, OP815, etc) and maintain the same high level of accuracy and repeatability as panel mounted detectors.

The SUMIX Manta-W+ is a revolutionary portable microscope designed for inspection of all types of single and multi-fibre optical connectors, patch cords and bulkhead, included but not limited to: MT, MPO, LC, FC, SC, CS®, E2000™, PRIZM, QSFP, ARINC, MIL Spec termini, ODC12, high-power SMA, Avim, mini-Avim and more.

The SUMIX WIZ-QS-110 is an automated interferometer for inspection of single fibre connectors, ferrules and bare fibre.