The OpoTest OP712 is a standalone USB powered and operated power meter. It can be integrated into the test and measurement process with any OptoTest Applications.
Absolute power and insertion loss (IL) are accurately measured with this USB power meter when used in conjunction with the corresponding software such as OPL-LOG and OPL-MAX. It is ideal for measuring fibers terminated with simplex connectors such as LC, SC or FC. The OP712 can also be used for high density connectors such as MTP or MPO.
An OP712 outfitted with a large area detector can be used to test high density connectors such as MTP/MPO.
The LAAD series of adapters offer a quick-change magnetic interface and is available for all standard connector options.
Using the OPL-SDK, the user can write custom applications to control the OP712.
Features:
- Measurement range
- InGaAs: 1mm, 3mm, 5mm and 10mm
- Silicon: 3mm
- High Power InGaAs: 2mm
- Remote head is ideal for rugged cables and ergonomic in manufacturing environments
- Calibration factors stored directly within the OP712
- System integration with OPL series software suite.
- Adapters available for universal ferrule sizes (1.25/1.6/2.0/2.5mm) and common connector types
- such as MTP/MPO, MT Ferrule, MT-RJ, LC, FC, SC, PRIZM-LT, MXC etc.
- Bare fiber adapters available for simplex or ribbon fiber
- 0.02dB relative accuracy when optical loss is less than 10dB
Return Loss | Single Mode | FTTX | Multimode | ||
Source Wavelength | 1310nm, 1550nm | 1310nm, 1550nm, 1490nm, 1625nm | 850nm, 1300nm | ||
Calibrated Measurement Range |
-10dB to -80dB | -10dB to -80dB | -10dB to -58dB | ||
Measurement Linearity | ±1dB (-12dB to -72dB) | ±1dB (-12dB to -72dB) | ±1dB (-10dB to -45dB) | ||
Distance Range | up to 2500 meters | ||||
Mandrel-free minimum distance | 1.7 meters (both reflections <-45dB) | ||||
Insertion Loss | Single Mode | FTTX | Multimode | ||
Source Center Wavelength | ±30nm from nominal | ±30nm from nominal | ±30nm from nominal | ||
Source Bandwidth | <10nm | <10nm | <140nm (850nm) <200nm (1300nm) | ||
Internal Fiber | 9/125μm (SMF28) | 9/125μm (SMF28) | 50/125μm, 62.5/125μm, 105/125μm | ||
Launch Condition | N/A | N/A | Available upon request | ||
Output Power* (typical) | -1.5dBm | -2.5dBm | -18dBm(850nm) -20dBm(1300nm): 62.5/125μm |
||
Insertion Loss Stability** | ±0.02dB | ±0.02dB | ±0.02dB | ||
Deviation ± 0.05dB | 0dBm to -65dBm at 1490nm | ||||
Deviation ± 0.01dB | <10dB power variation |
*For single channel systems. **Over 1 hour with a max. change of 1ºC. ***For 1, 2, and 3mm detectors.
Optical Power Meter | 1mm InGaAs | 3mm InGaAS | 5mm InGaAs | 10mm InGaAs | 3mm Silicon |
Measurement Range | +6dBm to -72dBm at 1490nm |
+3dBm to -72dBm at 1490nm |
0dBm to -65dBm at 1490nm |
0dBm to -55dBm at 1490nm |
0dBm to -65dBm at 980nm |
Wavelength Range | 850nm to 1650nm | 400nm to 1100nm | |||
Selectable Wavelength | Standard wavelengths (850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm) | Standard wavelengths (650nm, 850nm, 980nm) |
|||
Measurement Resolution (Display) | 0.001dB | ||||
Absolute Accuracy | ±0.25 dB at calibration conditions for all NIST traceable wavelengths | ||||
Deviation ± 0.05dB | +3dBm to -65m at 1490nm |
0dBm to -65dBm at 1490nm |
0dBm to -55dBm at 1490nm |
0dBm to -45dBm at 1490nm |
0dBm to -55dBm at 980nm |
Deviation ± 0.01dB | <10dB power variation |
<10dB power variation |
<10dB power variation |
<10dB power variation |
<10dB power variation |
Source | 1310nm/1550nm LASER | 1310nm/1490nm/1550nm/1625nm LASER | 850nm/1300nm LED |
Source Center Wavelength | ±30nm from nominal | ±30nm from nominal | ±30nm from nominal |
Source Bandwidth | <10nm | <10nm | <140nm (850nm) <200nm (1300nm) |
Internal Fiber | 9/125μm (SMF28) | 9/125μm (SMF28) | 50/125μm, 62.5/125μm, 105/125μm |
Launch Condition | N/A | N/A | Available upon request |
Output Power (typical) | -1.5dBm | -2.5dBm | -18dBm(850nm) -20dBm(1300nm): 62.5/125μm |
Source Stability* | ±0.02dB | ±0.02dB | ±0.02dB |
* Over 1 hour with a max. change of 1ºC.
Measurement Timing | Single Mode | FTTX | Multimode |
IL and RL, Dual Wavelength | 3s* | 6s | 3s* |
Switching Time (Multichannel) | 100ms |
* Using the front panel in Dual ILRL mode or running OPL-Pro with real-time update enabled.
Specifications are subject to change, please confirm specific performance characteristics of the product at the time of ordering. All specifications are valid within temperature range of 18ºC to 24ºC unless otherwise noted.
Photo | Product | SKU | |
---|---|---|---|
![]() |
OptoTest OP1021 Launch Condition Analyser | - | > |
![]() |
OptoTest OP710 Multi Channel Optical Power Meter | - | > |
![]() |
LUNA OBR 4600 Reflectometer – Lab Test | - | > |
![]() |
OptoTest OP831 Bi-Directional Insertion Loss Test System | - | > |
![]() |
APEX AP1000 Series Optical Multi Test Platform | - | > |
![]() |
OptoTest HPR Performance Reference Cables | - | > |
![]() |
FibrePro Polarisation Scramblers | - | > |
![]() |
FibrePro In-Line Polarisation Controller (PC1100) | - | > |
![]() |
FibrePro Multi-Channel Polarisation Controller Series (PC1200) | - | > |
![]() |
FibrePro Polarisation Controller Series (PC1000) | - | > |
![]() |
FibrePro Tunable Directional Coupler Series (TC1400) | - | > |
![]() |
OptoTest OP280 Ribbon Fibre Visual Fault Locator | - | > |
![]() |
LUNA OVA 5100 Optical Vector Analyser | - | > |
![]() |
OptoTest OP940 Insertion Loss and Return Loss Meter | - | > |
![]() |
OptoTest OP725-OP940 Bidirectional IL/RL Test System | - | > |
![]() |
OptoTest OP940-SW Insertion and Return Loss Meter | - | > |
![]() |
OptoTest OP480-OP280 MTP/MPO and Ribbon Fibre Polarity Test System | - | > |
![]() |
OptoTest OP720 Optical Switch | - | > |
![]() |
OptoTest OP850 Multichannel Insertion Loss Meter | - | > |
![]() |
OptoTest OP815 Insertion Loss Meter | - | > |
![]() |
OptoTest OP815-D Dual Channel (Duplex) Insertion Loss Meter | - | > |
![]() |
OptoTest OP508 Optical Power Meter Module | - | > |
![]() |
OptoTest OP510 Optical Power Meter Module | - | > |
![]() |
OptoTest OP735 Benchtop Optical Power Meter | - | > |
![]() |
OptoTest OP740 High Speed Multichannel Optical Power Meter | - | > |
![]() |
OptoTest OP250 Stabilized Light Source | - | > |
![]() |
OptoTest OP715 Benchtop Stabilized Light Source | - | > |
![]() |
OptoTest OP750 Multichannel Source | - | > |
![]() |
OptoTest OP725 Benchtop Optical Switch | - | > |
![]() |
OptoTest OP752-MOD Modal Conditioner | - | > |
![]() |
OptoTest OPLC-KIT Launch Condition Kit | - | > |
![]() |
OptoTest OP710-ANX Multichannel Optical to Electrical Converter | - | > |
![]() |
OptoTest OP1100 Discontinuity Analyser | - | > |
![]() |
OptoTest OPRH Remote Head Power Meters | - | > |
![]() |
OptoTest OP-SPHR Integrating Sphere | - | > |
![]() |
OptoTest OPL-CLX Software Suite | - | > |
![]() |
OptoTest OPL-LOG Software | - | > |
![]() |
OptoTest OPL-MAX | - | > |
![]() |
OptoTest OPL-PowerRT | - | > |
![]() |
OptoTest OPL-PRO | - | > |
![]() |
OptoTest Adapters | - | > |
![]() |
OptoTest High Performance Reference MTP/MPO Cables | - | > |
![]() |
OptoTest Connector Cleaning Tools - 25.Clean and 125.Clean | - | > |
![]() |
LUNA LCA 500 Lightwave Component Analyser | - | > |
![]() |
LUNA Phoenix 1400 Tunable Laser | - | > |
![]() |
LUNA Phoenix 1200 Tunable Laser | - | > |
![]() |
OptoTest OP415 Polarity Analyser | - | > |
![]() |
Tempo 930XC Handheld OTDR | - | > |
![]() |
APEX AP201x High Resolution Optical Spectrum Analysers (PM) | - | > |
![]() |
APEX AP206x High Resolution Optical Spectrum Analysers (SM) | - | > |
![]() |
APEX AP207x High Resolution & Speed Optical Spectrum Analysers | - | > |
![]() |
APEX AP208x High-Resolution Optical Spectrum Analyser (OSA) | - | > |
![]() |
LUNA 6415 Reflectometer/Lightwave Analyser – Production Test | - | > |
![]() |
LUNA SLD-101S – Superluminescent Diode Light Source | - | > |
![]() |
LUNA OCDR-1000 – Optical Coherence Domain Reflectometer | - | > |
![]() |
LUNA OCA-1000 – Optical Component Analyser | - | > |
![]() |
LUNA DGD-1000 – First Order PMD Source/Emulator | - | > |
![]() |
LUNA MPC-203 – High Speed Multifunction Polarisation Controller | - | > |
![]() |
LUNA MPC-202 – Advanced Multifunction Polarisation Controller | - | > |
![]() |
LUNA PDLE-101 – PDL Emulator | - | > |
![]() |
LUNA PMD-1000 – PMD Source | - | > |
![]() |
LUNA POS-203 – Polarisation Stabiliser, 3 Port | - | > |
![]() |
LUNA POS-202 – Polarisation Stabiliser, 2 Port | - | > |
![]() |
LUNA PSY-201 – Polarisation Synthesizer/Analyser | - | > |
![]() |
LUNA MPC-201 – Multifunction Polarisation Controller | - | > |
![]() |
LUNA PCD-104 – Polarisation Scrambler | - | > |
![]() |
LUNA PXA-1000 – Distributed Polarisation Crosstalk Analyser | - | > |
![]() |
LUNA POD-201 – Polarimeter | - | > |
![]() |
LUNA PDL-201 – PDL/IL Multimeter | - | > |
![]() |
LUNA ERM-202 – Extinction Ratio Meter | - | > |
![]() |
LUNA DOP-201- Degree of Polarisation Meter | - | > |
![]() |
LUNA PSGA-101 – Polarisation Measurement System | - | > |
![]() |
LUNA OBR 6200 Portable Reflectometers – Field Test | - | > |
![]() |
OptoTest SMX-Manta-W+ Microscope | - | > |
![]() |
OptoTest MAX-Quantum Interferometer | - | > |
![]() |
OptoTest MAX-QM+ Interferometer | - | > |
![]() |
OptoTest MAX-QS+ Interferometer | - | > |
![]() |
OptoTest WIZ-QS-110 Interferometer | - | > |
![]() |
OptoTest OP940-CSW Compact Multichannel IL/RL Meter | - | > |
![]() |
OptoTest OP925 Continuous Wave IL/RL Meter | - | > |
![]() |
Tempo Communications FTK-PP Pro Plus Fibre Tool Kit | - | > |
![]() |
Tempo Communications FTK-B Basic Fibre Tool Kit | - | > |
![]() |
Tempo Communications FTK-P Pro Fibre Tool Kit | - | > |
![]() |
Tempo Communications FTK-T Termination Fibre Tool Kit | - | > |
![]() |
OP960 Series Optical Return Loss Meter & Insertion Loss Meters | - | > |
![]() |
OptoTest Manta HM Microscope | - | > |