Manta W+ is a revolutionary portable microscope designed for inspection of all types of single and multi-fibre optical connectors, patch cords and bulkhead, included but not limited to: MT, MPO, SN-MT, MMC, LC, FC, SC, CS®, SN®, MDC, E2000™, MXC, PRIZM, QSFP, ARINC, MIL-38999, ODC®, Q-ODC®, SMA, High-power SMA, Avim, mini-Avim and more.
Featuring resolution of a benchtop microscope, the probe gives the possibility to check multi-fiber, SMA and single fiber connectors in the field. The whole MTP®/MPO connector is tested in just one scan — as fast as 2 seconds*!
Manta W+ can be used for visual inspection of the connector end face for scratches, defects and contamination, as well as for automatic Pass/Fail testing based on IEC standards.
Part number for ordering: SMX-Manta-W+.
*for MT12 ferrule
Features:
Large field of view (4.1 × 3.0 mm)
Test MTP®/MPO connectors with up to 72 fibres in just one scan, inspect entire ferrule surface including guide holes if needed. Check the whole SMA connector endface in one shot.
Detailed high-resolution picture
Enjoy high accuracy testing with 1.8 µm resolution and 0.75 µm defect size detection capability perfect for testing both multi-fiber and single fibre connectors.
Extremely fast inspection
It takes only 2 seconds to check a standard MTP®/MPO connector (12 or 16 fibers) not using autofocus and 4 seconds with autofocus.
Wide variety of tips
Inspect all types of single-fiber and multi-fiber optical connectors, patchcords and bulkhead, included but not limited to: MT, MPO, LC, FC, SC, E2000™, PRIZM, QSFP, ARINC, MIL-38999, ODC12, High-power SMA, Avim, mini-Avim and more.
Extended working distance
Get inside patch panels to test MTP®/MPO and other connectors.
Pass/Fail LED indicator
See Pass/Fail result without looking at your tablet.
Kit Contents
SMX-Manta-W+ digital inspection system includes:
- SMX-Manta-W+ microscope
- USB 3.0 cable
- Case
- MaxInspect™ analytical software
Tips and other accessories should be ordered separately.
Order optical connector cleaners together with a microscope.
Field of view: | 4.1 × 3.0 mm |
Defect size detection: | 0.75 µm |
Optical resolution:
|
1.8 µm |
Magnification: | 260× |
Focus: | auto |
Measurement time: The indicated values do not include autofocusing time. |
2.1 sec for MT12,
2.3 sec for MT16, 4 sec for MT24, 7.7 sec for MT72. |
Light source: | royal blue LED, 447.5 nm |
Camera type: | digital, USB3.0 |
Sensor type: | monochrome, 4096 × 3000, 1’’ CMOS |
Live image: | 4096 × 3000, 15 fps full resolution |
Power source: | USB 3.0 port of PC |
Cable: | USB 3.0, detachable |
Dimensions (H × W × L): | 77 × 28 × 249 mm (3 × 1.1 × 9.8 inches) |
Weight: | 491 g (1.08 lbs) |
Housing material: | aluminum alloy |
Barrel material: | stainless steel |
Operating temperature: | +5 to +35°C |
Compatible with: | desktop PC, laptop, tablet |
PC System Requirements
Operating system: | Windows 10 | |
For viewing measurement results: | Microsoft™ Excel® 2010 or higher | |
Recommended configuration | Minimal configuration | |
Processor: | Intel Core i5 or higher | Intel Core i3 |
RAM: | 4 GB | 2 GB |
Video card: | Any with 24 bit True Color | Any with 24 bit True Color |
Hardware interface: | Intel integrated USB 3.0 Host Controller.At least one USB 3.0 port for connection | Intel integrated USB 3.0 Host Controller.At least one USB 3.0 port for connection |
Hard Drive: | 1 Gb or more | 1 Gb |
Performance: | 500 Mflops or more | 400 Mflops |
Tablet system requirements
Operating system: |
Windows 10 |
|
Recommended configuration |
Minimal configuration |
|
Processor: |
Intel Core i7 |
Intel Core i5 |
RAM: |
4 GB |
2 GB |
Screen resolution: |
1280 × 800 px or higher |
1024 × 768 px |
Display size: |
10" or more |
8" |
Hardware interface: |
USB 3.0 |