Data Acquisition & Data Loggers

DrDAQ Kit comprising DrDAQ, 2 temperature sensors, 1 pH sensor, 1 humidity sensor and 1 oscilloscope probe. The Pico Technology DrDAQ is a versatile instrument that connects to the USB port of any PC.  Using the supplied PicoScope software it can be used as an oscilloscope, spectrum analyser and signal generator.

For a limited time only, purchase the Pico TC 08 and receive 2 Pico Type K, exposed tip, 1 meter, PTFE Insulated Thermocouple Sensors absolutely free of charge! (worth £14) Choose from the dropdown box below:

Temperature measurement and logging. Monitor between 1 and 8 thermocouples, and you are ready to go. The Pico Technology TC-08 Thermocouple Data Logger offers industry–leading performance and is an inexpensive answer to your temperature measuring needs.

Download the NEW PicoLog 6 now for free, from https://www.picotech.com/download.

The Pico Technology PP216 Magnetic Induction Kit provides a simple and effective method for students to investigate the concepts of Faraday’s laws of electromagnetic induction. A small bar magnet is dropped down the tube and, as it passes through the coil, an electromotive force (EMF) is induced. The output pulse can be viewed using a Pico Technology PC Oscilloscope, a DrDAQ data logger or most other types of digital storage oscilloscopes.

The Pico Technology EL032 is a replacememt 3 meter sensor cable for DrDAQ sensors.

Pico Technology MI029 BNC plug to 4 mm (banana) plug cable, 1.2 m.

The DrDAQ redox sensor (also known as an ORP sensor) can measure redox potential in the range of –1500 mV to +1500 mV. Positive readings indicate an oxidizing agent (addition of oxygen), while negative readings indicate a reducing agent (reduction of oxygen).

Measuring pH using DrDAQ is achieved using the Pico Technology DD011 pH electrode which plugs in to the dedicated BNC connector on the DrDAQ logger. It covers the full 0 to 14 pH range, and its robust epoxy body makes ideal for educational use. The electrode comes complete with a small bottle of storage solution to help prevent it drying out.

The Pico Technology PP163 DrDAQ humidity sensor is designed for the cost-effective measurement of relative humidity. When plugged into one of the external sensor sockets on DrDAQ (using the supplied 3 m cable) readings can be displayed in %RH. The sensor has a response time of 60 seconds and can operate over a 0 to 60 °C temperature range.

The Pico Technology DD100 is a high-accuracy general-purpose thermistor temperature sensor with a two-meter lead for use with the DrDAQ Data Logger. Suitable for air, surface or liquid measurements.

The Pico Technology DrDAQ is a versatile instrument that connects to the USB port of any PC.  Using the supplied PicoScope software it can be used as an oscilloscope, spectrum analyser and signal generator.

Data Acquisition Mainframe with DMM Module, 32 channel MUX module, and M3TB32 terminal block.

M3TB32 Rigol 32 Channel MUX Terminal Box

MC3132 Rigol 32 Channel Multiplexer Module