Probe Stations

Small, lightweight, oil-less vacuum pump rated at 7 litres /min at -33.3 kPa (-250 mm Hg, -333 mbar, -9.84 in. Hg). Designed for use with our range of probe stations to secure the wafer or specimen under test onto the chuck.

Suitable for handling electronic parts such as ICs and LSIs etc. CE Marked.

Bare flying leads to be installed or wired into your own enclosure.

Call our Application Engineers on 01582 764334 to discuss your application and match your requirements.

Following on from their success of the C-2-RF probe station, the worlds smallest and affordable 2 inch probe station, EverBeing now offer a range of Millimeter-Wave Probe Stations for precise integration with your existing Vector Network Analysers (VNA), wave guides and frequency extenders from leading brands like Anritsu, Keysight, Rohde & Schwarz, VDI, OML. Two models are available EB-6A and EB-6V to accommodate the different sizes of waveguides and frequency extenders you prefer. The EB-6A is designed specifically to accommodate Anritsu equipment whilst the EB-6V is more generic to work with Keysight, Rohde & Schwarz, VDI, and OML mmWave modules.

Call our Application Engineers on 01582 764334 to discuss your application and match your requirements.

Following on from their success of the C-2-RF probe station, the worlds smallest and affordable 2 inch probe station, EverBeing now offer a range of Millimeter-Wave Probe Stations for precise integration with your existing Vector Network Analysers (VNA), wave guides and frequency extenders from leading brands like Anritsu, Keysight, Rohde & Schwarz, VDI, OML. Two models are available EB-6A and EB-6V to accommodate the different sizes of waveguides and frequency extenders you prefer. The EB-6A is designed specifically to accommodate Anritsu equipment whilst the EB-6V is more generic to work with Keysight, Rohde & Schwarz, VDI, and OML mmWave modules.

Call our Application Engineers on 01582 764334 to discuss your application and match your requirements.

Low cost version of the popular SR-4 Four-Point Prober, the KSR-4 Four-Point Probe System is an simple-to-use tool for the rapid measurement of sheet resistance, resistivity, and conductivity of materials. To be used in conjunction with your existing Source Measure Unit (SMU) or current source and volt meter. Head Up/Down 30mm, Probing, Z Resolution = 10 Micron

We can offer 6 models of vibration isolation tables, either table top for probe station or microscope or 36 inch isolation tables are available to isolate your probe station or any other equipment that needs to be isolated from the ground.  

• Active Air Cushion
• Isolates Vibrational Source from Ground
• Adjustable Guard Rail to Prevent contact to table

EverBeing hot chucks are capable of heating your device under test up to 700°C. Selection ranges depending on chuck size and maximum required temperature for your experiments.

• Chuck size of: 2″, 4″, 6″, 8″, 12″
• Temperature range C 100/200/300/400/500/600/700
• Temperature accuracy  +/- 0.5°C
• Stainless steel chuck
• Water Cooling Tank Optional 

Call us 01582 764334 to speak to one of our Application Engineers.

Beryllium copper (BeCu) BC Series probe tips suitable for gold contact landing pads. Medium cost, lower contact resistance.

• Beryllium copper (BeCu Material
• Sizes 15 μm or 25 μm
• 20 mil shank diameter
• 32 mm length
• Box of 10
• Tip bend optional

Celebrating 25 years, EverBeing have launched the latest addition to their line, the C2-RF, the world’s smallest and most affordable RF Probe Station.

Measuring just 360mm X 360mm and only 26Kg, it can hold 4 RF probes and two DC bias probes on the hard chrome platted platen.

Fitted with a 2 inch vacuum chuck, four anti-vibration mounts and 10 micron precision X-Y alignment, makes this compete with probe stations that cost many times the price. The U Shaped chuck holds the DUT and RF Calibration substrate.

Small, lightweight, enclosed, oil-less vacuum pump rated at 7 litres /min at -33.3 kPa (-250 mm Hg, -333 mbar, -9.84 in. Hg). Designed for use with our range of probe stations to secure the wafer or specimen under test onto the chuck.

Suitable for handling electronic parts such as ICs and LSIs etc. CE Marked.

Call our Application Engineers on 01582 764334 to discuss your application and match your requirements.

Celebrating 25 years of manufacturing probe stations and micro positioners the C-Series are one of the world’s most affordable, yet built with precision.

They are 5 models in this series, starting at 2 inch chuck to 8 inch C2, C2-RF, C4, C6 and C8.

With a 10 micron precision X-Y alignment, hard chrome pated platen, vacuum chuck and anti-vibration mounts as standard, makes this compete with probe stations that cost many times the price. The 4 inch and above features chuck up/down. Available with a trinocular microscope or a Dinolite USB microscope.

The EverBeing CG-196 Cryogenics Probe Station allows probing at cryogenics temperature where the wafer needs to be inside a vacuum chamber. The Everbeing CG-196 can also handle high temperatures of 400, 500, 600 & 700°C inside the vacuum chamber.

Micropositioner with true linear motion of 12mm in each axis with 0.8um resolution.

Available with Permanent Magnet (M), Magnet on/off (E) or Vacuum bases (V) to suit all applications.

• Accuracy: 0.8micron (0.8um)
• Travel X-Y-Z:12MM * 12MM * 12MM
• Lead screw: 80 TPI (threads per inch)
• Base Types: Permanent Magnet, Magnet on/off or Vacuum
• Dimensions: 52mm(W) x 96mm(D) x 76mm(H)
• Weight: 550g

Call our Application Engineers on 01582 764334 to discuss your application and match your requirements.

Price shown is for Magnet On/Off Version (EB-050E).

Space saving Micropositioner with linear motion of 12mm in each axis with 1.7um resolution. Available with Permanent Magnet (M), Magnet on/off (E) or Vacuum bases (V) to suit all applications.

Price shown is for Magnet On/Off Version (EB-700E).

• Accuracy: 1.7 micron (1.7um)
• Travel X-Y-Z: 12MM * 12MM * 12MM (standard)
• Travel X-Y-Z: 20MM * 20MM * 20MM (please ask)
• Lead screw: 40 TPI (threads per inch)
• Base Types: Permanent Magnet, Magnet on/off or Vacuum
• Dimensions: 38mm(W) x 62mm(D) x 45mm(H)
• Weight: 200g

Available in left or right handed versions.

Call our application engineers on 01582 764334 to discuss your application and requirements.

High precision micropositioner with true linear motion of 12mm in each axis with 0.35/0.70um resolution.

Larger footprint for greater stability and finer control, for RF probing,

Available with Permanent Magnet (M), Magnet on/off (E) or Vacuum bases (V) to suit all applications.

• Accuracy: 100 TPI = 0.70micron (0.70um) / 200 TPI = 0.35micron (0.35um)
• Travel X-Y-Z:12MM * 12MM * 12MM
• Lead screw: 100/200 TPI (threads per inch)
• Base Types: Permanent Magnet, Magnet on/off or Vacuum
• Dimensions: 52mm(W) x 96mm(D) x 76mm(H)
• Weight: 1000g

Price shown is for Magnet On/Off Version with 100 TPI (EB-005E-100).

Call our Application Engineers on 01582 764334 to discuss your application and match your requirements.

The probe tip holder is the mechanism between the micropositioner & the probe tip. We offer the tubular tip holder with standard, coaxial and triaxial electrical connections.

The probe tip holder is the mechanism between the micropositioner & the probe tip. We offer the spring tip holder with standard, coaxial and triaxial electrical connections.

General purpose EverBeing Tungsten probe tips, 32mm long, available in sizes 0.4 μm to 200 μm suitable for piercing oxide layers. Low cost, low contact resistance, durable.

• Tungsten Material
• Sizes 0.4 μm to 200 μm
• 20 mil shank diameter
• 32 mm length
• Box of 10 / 5
• Optional tip bend (call)
• Optional gold plating (Call)

We can provide a full range of probe tip sizes and types for DC to RF measurements.

The probe tip holder is the mechanism between the micropositioner & the probe tip. We offer the screw nut tip holder with standard, coaxial and triaxial electrical connections.

The probe tip holder is the mechanism between the micropositioner & the probe tip. We offer the screw tip holder with standard, coaxial and triaxial electrical connections.