Spectrum Analysers, VNA & EMC Test

Accurate and Repeatable High-Resolution EMC and EMI diagnostics with Hand-held Near Field Probes on your lab-bench the EMProbe allows EMC scanner of your circuit with reliable and repeatable accuracy to give a graphical representation of EMC issues in a matter of minutes. The software allows for a visual comparison of before/after to show how board changes have improved the circuit design. This is an invaluable tool for all EMC pre-compliance engineers.

Learn More

Dual-break torque wrench with N-type connector

Learn More

Dual-break torque wrench SMA / PC3.5 / K-type

Learn More

The RSA3000 supports two kinds of RBW filters: Gaussian (-3 dB) or EMC (-6 dB), when EMC filter is selected currently, the available RBW can only be 200 Hz, 9 kHz, 120 kHz, or 1 MHz. By default, the analyser uses the Gaussian filter. If the detector type is "Quasi-peak", then the analyser automatically switches to EMI filter.

Learn More

RSA3000 - Extend Swept RBW down to 1 Hz

Learn More

RSA3000 – 20dB Pre-Amplifier

Sets the RF front-end preamplifier to be on or off. When the signal under test is a low-level signal, turning on the preamplifier can reduce the displayed average noise level, so that you can distinguish low-level signals from the noise. By default, the preamp gain is 20 dB.

Learn More

9kHz-1.5GHz spectrum analyser Learn More

The Advanced measurement kit offers the additional enhanced measurements for the RSA3000 series Real time spectrum analysers:

• T-Power
• ACP
• Multichanel Power
• Occupied BW
• Emmission BW
• C/N Ratio
• Harmonic distortion
• TOI
• VSWR

Learn More

RSA3000 - Extend Swept RBW down to 1 Hz

Learn More

RSA3000 Real-Time Analysis Bandwidth extended from 10MHz to 40 MHz

Learn More

Rigol DSA710 - 100kHz – 1.0GHz spectrum analyser. The DSA710 series is one of RIGOL's compact size, lightweight, economic spectrum analysers, the digital IF technology guarantees its reliability and performance to meet the most demanding RF applications. Learn More

Rigol DSA705 – 100 kHz to 500MHz spectrum analyser. The DSA705 series is one of RIGOL's compact size, lightweight, economic spectrum analysers, the digital IF technology guarantees its reliability and performance to meet the most demanding RF applications. Learn More

VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included. Requires TG Option. Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: >= 25 dB

Learn More

800 MHz to 4 GHz VSWR Bridge with DSA8-VSWR software for DSA800 Spectrum Analyzers. *SW does NOT work with DSA1000 Family. Requires TG Option.

Learn More

The EMScanner from Y.I.C. Technologies consists of a patented scanner fitted a compact controller, and a PC running EMViewer software. A great tool for EMI Pre-compliance checking to visually identify EMI/EMC issues and solve these quickly using the software tools to locate the faults. The EMScanner can be used with most leading brands of Spectrum Analysers, like Rigol Technologies, Keysight, Rohde & Schwarz and Tektronix (please call to check).

The patented scanner consists of an array of 1,218 H-field (magnetic) probes spaced every 7.5 mm which provides an effective 3.75 mm resolution. The system operates from 150 kHz to 4 GHz and from 150 kHz to 8 GHz with upgradable and optional software license key. The EMViewer application must also be installed on the customer-supplied PC.

Learn More

Rigol RSA3000-EMI Pre-Compliance Bundle – Includes a Rigol RSA3030-TG Real-time spectrum analyser, RSA3000-EMI Measurement mode license and the NFP-3 near-field probe set.

Learn More

Rigol RSA3000-EMI Pre-Compliance Bundle – Includes a Rigol RSA3030 Real-time spectrum analyser, RSA3000-EMI Measurement mode license and the NFP-3 near-field probe set.

Learn More

Rigol RSA3000-EMI Pre-Compliance Bundle – Includes a Rigol RSA3030E-TG Real-time spectrum analyser, RSA3000E-EMI Measurement mode license and the NFP-3 near-field probe set.

Learn More

Rigol RSA3000-EMI Pre-Compliance Bundle – Includes a Rigol RSA3015E-TG Real-time spectrum analyser, RSA3000E-EMI Measurement mode license and the NFP-3 near-field probe set.

Learn More

Rigol RSA3000-EMI Pre-Compliance Bundle – Includes a Rigol RSA3030E Real-time spectrum analyser, RSA3000E-EMI Measurement mode license and the NFP-3 near-field probe set.

Learn More

Rigol RSA3000-EMI Pre-Compliance Bundle – Includes a Rigol RSA3015E Real-time spectrum analyser, RSA3000E-EMI Measurement mode license and the NFP-3 near-field probe set.

Learn More

Rigol RSA3015-TG 9 kHz to 1.5 GHz Real-time Spectrum Analyser with Tracking Generator. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

Rigol RSA3015E 9 kHz to 1.5 GHz Real-time Spectrum Analyser. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included. Requires TG Option. Frequency range: 2 GHz - 8 GHz, Typical Directivity: >= 25 dB.

Learn More

9kHz-1.5GHz spectrum analyser Learn More

Rigol Spectrum Analyser, 9kHz-3.2GHz. For design and development implementing Wi-Fi, Bluetooth, and other RF standards, the SSB Phase Noise down as low as -98 dBc/Hz at a 10 KHz offset empowers engineers to more accurately analyze modulations and noise surrounding their signals of interest. This becomes important for debugging and immunity testing of transceiver systems. 

Learn More

Rigol RSA3030-TG 9 kHz to 3.0 GHz Real-time Spectrum Analyser with Tracking Generator. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

Rigol RSA3030 9 kHz to 3.0 GHz Real-time Spectrum Analyser. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

9kHz-3.2GHz spectrum analyser. The DSA832 series is one of RIGOL's compact size, lightweight, economic spectrum analyzers, the digital IF technology guarantees its reliability and performance to meet the most demanding RF applications. Learn More

Rigol Spectrum Analyser, 9kHz-3.2GHz. For design and development implementing Wi-Fi, Bluetooth, and other RF standards, the SSB Phase Noise down as low as -98 dBc/Hz at a 10 KHz offset empowers engineers to more accurately analyze modulations and noise surrounding their signals of interest. This becomes important for debugging and immunity testing of transceiver systems. 

Learn More

Rigol RSA5032-TG 9 kHz to 3.2 GHz Real-time Spectrum Analyser with factory installed Tracking Generator option. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

Rigol RSA3045 9 kHz to 4.5 GHz Real-time Spectrum Analyser. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

Rigol RSA3045-TG 9 kHz to 4.5 GHz Real-time Spectrum Analyser with Tracking Generator. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

9kHz-3.2GHz spectrum analyser. The DSA832 series is one of RIGOL's compact size, lightweight, economic spectrum analyzers, the digital IF technology guarantees its reliability and performance to meet the most demanding RF applications. Learn More

Rigol RSA5032 9 kHz to 6.5 GHz Real-time Spectrum Analyser. Engineers integrating WiFi, Bluetooth, Vector Signal Analysis and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. New Vector Signal Analysis Option RSA5000-VSA now available. Learn More

The PicoVNA 106 is a professional USB-controlled, laboratory grade vector network analyser VNA of unprecedented performance, portability and affordability. Small in size to allow portability and low cost, the instrument boasts a ‘Quad RX’ four-receiver architecture to eliminate the uncorrectable errors, delays and fragility of three-receiver designs with internal transfer switches. 

Call our application engineers on 01582 764334 to discuss your application or arrange a demo.

Learn More

Rigol RSA5032 9 kHz to 6.5 GHz Real-time Spectrum Analyser. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

Rigol RSA5032-TG 9 kHz to 6.5 GHz Real-time Spectrum Analyser with factory installed Tracking Generator option. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Rigol Technologies Real-Time Spectrum Analysers bring the dimension of time to RF Analysis making it easier to monitor and characterise these complex RF systems. Learn More

9kHz - 7.5GHz spectrum analyser. The DSA800 series is one of RIGOL's compact size, lightweight, economic spectrum analyzers, the digital IF technology guarantees its reliability and performance to meet the most demanding RF applications. Learn More

9kHz - 7.5GHz spectrum analyser. The DSA875 series is one of RIGOL's compact size, lightweight, economic spectrum analyzers, the digital IF technology guarantees its reliability and performance to meet the most demanding RF applications. Learn More

Rigol NFP-3 Near Field Probe Set 30MHz to 3GHz. Includes 4 probe types, 1m lead BNC (M)-SMB (F), Adapter N-Type(M)-BNC(F), storage case.

Learn More

DC to 100 kHz bandwidth
90 dB dynamic range
16-bit A/D conversion
Harmonic, band and sideband analysis
100 kHz real time bandwidth
Internal and external triggering
Linear and exponential averaging
Hardcopy output to printers and plotters 
3.5 inch MS-DOS compatible disk drive
GPIB and RS-232 interfaces included

Learn More

• 102.4 kHz frequency range on both channels
• 90 dB dynamic range (FFT mode)
• 145 dB dynamic range (swept sine mode)
• 102.4 kHz real-time bandwidth
• Display two different frequency spans
• Real-time ANSI standard octave analysis (1/1, 1/3, and 1/12 octave)
• Low distortion sine source (-90 dBc) plus two-tone, chirp, noise, burst and arbitrary
• 2 Msample memory (8 Msample optional) for time capture, waterfall plots and arbitrary source
• Postscript, PCX, GIF and HP-GL output

Learn More

DC to 100 kHz bandwidth
90 dB dynamic range
16-bit A/D conversion
Harmonic, band and sideband analysis
100 kHz real time bandwidth
Internal and external triggering
Linear and exponential averaging
Hardcopy output to printers and plotters 
3.5 inch MS-DOS compatible disk drive
GPIB and RS-232 interfaces included

Learn More

• DC to 102.4 kHz Bandwidth
• 90 dB dynamic range
• 16-bit A/D conversion
• Low distortion synthesized source
• ANSI standard octave measurements
• 145 dB dynamic range swept sine mode

Learn More

Spectrum analyser measurement package option Learn More

EMI-filter & quasi-peak detector kit Learn More

Rack mounting kit Learn More

Rigol Spectrum Analyser Measurement Package Option for use with DSA815 Learn More

40dB attenuator accessory for oscilloscopes or generators Learn More

Transmitter RF demo kit Learn More

PC-based software Learn More

DSA accessories package Learn More