The Ximea 3.0 metre Trigger Cable is a 3 pole digital I/O circular cable with CPIO Hirose Connector (HRS SR38-4P-3P (71) at one end whilst the other has a pigtail.

The Ximea 5.0 metre Trigger Cable is a 3 pole digital I/O circular cable with CPIO Hirose Connector (HRS SR38-4P-3P (71) at one end whilst the other has a pigtail.

Black 1.0 metre USB3.0 cable. Type A to Micro B with horizontal locking screws with a transfer rate of 5Gb per second.

Black 10.0 metre USB3.0 active repeater cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.

Black 15.0 metre USB3.0 active repeater cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.

Black 20.0 metre USB3.0 active repeater cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.

PCI express x1 Gen2 adapter, 2x USB 3.1 ports, asmedia ASM1142

Black 3.0 metre USB3.0 angled cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.

Black 3 metre USB3.0 cable, Type A to Micro B with horizontal locking screws (10 pin Moulded Plug) with a transfer rate of 5Gb per second.

PCI express x1 Gen2 adapter, 4x USB 3.0 ports, Fresco Logic FL1100

Black 5.0 metre USB3.0 cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.

Break Out Board, Flex-Line, Simple Board Level Micro-B USB3.0.

Cable FPC MQ Flex-Line, 0.1m can be used for connecting xiC flex line models to carrier board or trough adapter and standard USB 3.0 cable to the host computer. NOTE: Cable have marked ends. It is important to connect the end marked “CAM” to the camera and end marked “BOB” tohost or adapter. Swapped orientation leads to nonoperational state. Connecting camera to powered host can cause destruction of camera. For detaching cable the connector need to be unlocked, otherwise connector soldering may be damaged.

The mounting bracket for tripod is made from anodised aluminium, increasing the resistance of the metal to wear. With dimensions of 6.4x28x5.5mm, all corners are chamfered and all drilled holes are thread milled.

The mounting bracket for tripod is made from anodised aluminium, increasing the resistance of the metal to wear. With dimensions oMQ series tripod mounting bracket thick - for lenses with a diameter > 37 mm Universal xiQ series tripod mounting bracket, 9.5 mm thick.