• Electrolytic polishing or chemical etching
• Simultaneous two-sided polishing
• No induced artifacts
• Easily adjustable flow rate, jet and specimen positions
• Reliable, accurate termination

• A precision ground punch and die plate eliminate specimen stress and distortion
• A spring-loaded return plunger keeps the disk specimen on the die plate surface for convenient handling
• Available in standard sizes of 1 mm, 2.3 mm, and 3.0 mm
• Other sizes available upon request

• Precise planar grinding
• Specimens up to 18 mm diameter

• Minimal mechanical and thermal damage
• Thin specimens (>10 µm) or thick (<1 cm)
• Rapidly cuts disks, rods, or rectangular specimens
• Automatic termination

• Fabricate precise cross-section specimens for transmission electron microscopy
• Aligns area of interest
• Produces consistent glue layer thickness

• Controlled thinning rate
• Precise
• Easy to use
• Automated operation
• Alignment microscope

The Quorum E3100 large chamber critical point dryer has been an industry standard for over 35 years and is used in numerous scanning electron microscopy (SEM) laboratories around the world. Primarily used for critical drying of biological and geological specimens, the E3100 can also used for the controlled drying MEMs,  aerogels and hydrogels.

The Quorum GloQube® Plus is a cost-effective, compact and easy to use glow discharge system, designed to fulfil the needs of laboratories with TEM.

The Quorum K850 combines versatility and ease of operation. Built-in thermo-electric heating and adiabatic cooling allow precise temperature control. The vertical pressure chamber (32 mm diameter x 47 mm) has a side viewing port, which gives a clear view of the liquid meniscus during filling. A magnetic stirrer ensures optimal mixing and exchange of process fluids.

The Quorum K850WM is a compact, bench-top instrument designed to critical point dry a complete 6″/150 mm wafer. A convenient wafer holder allows rapid transfer and ensures that pre-drying does not occur.