Four Point Probing & Sheet Resistivity
Four Point Probing & Sheet Resistivity
Everbeing’s four-point probe uses the four co-linear probes on contact to determine the sheet resistance of your wafer or thin films. The method uses the four terminal sensing or “Kelvin” approach by using separate junctions for voltage and current instead of through the same ...
⤑ Read MoreFour Point Probing & Sheet Resistivity
-
EverBeing KSR-4 Four-Point Prober, Sheet Resistivity
£1,877.00 £2,252.40The EverBeing KSR-4 Four-Point Probe System is an simple-to-use tool for the rapid measurement of sheet resistance, resistivity, and conductivity of materials. To be used in conjunction with your existing Source Measure Unit (SMU) or current source and volt meter. Or with our low cost SMU4001 Head Up/Down 30mm, Probing, Z Resolution = 10 Micron.
-
EverBeing SR-4-6L, Four-Point Prober, Sheet Resistivity, 4-Point Probe
£2,577.00 £3,092.40The SR-4 Four-Point Probe System is an easy-to-use tool for the rapid measurement of sheet resistance, resistivity, and conductivity of materials. To be used in conjunction with your existing Source Measure Unit (SMU) or current source and volt meter. Head Up/Down 10mm, Probing, Z Resolution = 1Micron.
