Product is a 5 pack of low-lint and absorbent cloths. 

2 Small spray pump heads for small HDPE bottle, part no. BOTSM, or replacements for the SBKS kit

2 Small spray pump heads for small HDPE bottle, part no. BOTSM, or replacements for the SBKS kit

Replacement valve cores for the Sure Shot S8AR and S16AR sprayer.

2 spray pump heads for medium spray bottle (Bottle only part no. BOTMD)

This is the same bottle as contained in the SBKM Medium Sprayer Kit.

Unwaxed Dental Floss for embedding and pulling off the dry First Contact Polymer film.

This is the same bottle as contained in the SBKT Larger Trigger Sprayer Kit.

The Smaller Sprayer Kit:

• 1 x 60ml (2oz)spray bottle with cap
• 2 x spray heads for bottle

A 5 pack of 7ml graduated pipettes for applying First Contact Polymer to the surface without pouring or spraying. The pipettes are ~6" long (15cm).

The package contains 10 foam swabs. These cleanroom-safe swabs are an excellent choice to spread polymer on small precision surfaces. The swabs are 3.5" (90cm) long with a 5/8" (16mm) tip.

The Medium Sprayer Kit Includes:
1 x 240ml (8oz) HDPE bottle with cap
2 x spray heads for bottle

Five pack of 23 ml pipettes for applying First Contact Polymer to the surface without pouring or spraying. The pipettes are ~12" long (30cm).

2 large spray pump heads for 16 oz HDPE bottle (bottle only part no. BOTTR)

Chemically Inert Mesh: 5 - 3" x 3" squares. Perfect for embedding in polymer as it dries to provide a lifting tab. Highly recommended to remove the dry polymer film from mounted optics.

100 pack of Peel Tabs specially designed to adhere to First Contact Polymer.

"Bumper Sticker" large peel tabs, named for their large size, for removing dry polymer from large substrates such as metre-size mirrors. These tabs are 6" x 3" and provide ample surface stick area and hand hold for large applications. 

The Large Sprayer Kit Includes:

• 1 x 500ml (16oz) bottle with cap
• 2 x spray heads

Unwaxed Dental Floss for embedding and pulling off the dry First Contact Polymer film.

This 2.8 ounce (82ml) spray bottle of water based cleaner is a pretreatment for use in conjunction with First Contact Polymers to remove water based stains, spots, pollen, etc. The pretreatment has been reformulated to better coalesce with First Contact Polymer.

Quick Mask drop cloth to protect the area around a mirror or optic (such as inside a telescope) from over-spray while spraying First Contact Polymer.

Perfect, simple device for pressurising the S8AR and S16AR aluminum refillable, reusable spray bottles. Only a few pounds is necessary or advisable to spray First Contact Polymer.

This 8 ounce (225ml) spray bottle of water based cleaner is a pretreatment for use in conjunction with First Contact Polymers to remove water based stains, spots, pollen, etc. The pretreatment has been reformulated to better coalesce with First Contact Polymer.

Cleanroom compatible Polyetherether Ketone (PEEK) Mesh. Package contains 5 - 3" x 3" sheets of precision woven mesh.

16 oz. capacity red powder coated sprayer.
.

The Fine Nozzles and Coarse Nozzles provide the best spray patterns for vertical or angle optics. The Fine Nozzles offer less flow for controlled application on smaller optics, while the Coarse Nozzles offer faster application on optics larger than 3". While both the Fine and Coarse Nozzles will work for horizontal or near-horizontal optics, the Medium and Regular Nozzles are able to apply First Contact Polymer faster than the Fine or Coarse Nozzles.

Please see Specification Table for a quick guide on which nozzles to select.

The Fine Nozzles and Coarse Nozzles provide the best spray patterns for vertical or angle optics. The Fine Nozzles offer less flow for controlled application on smaller optics, while the Coarse Nozzles offer faster application on optics larger than 3". While both the Fine and Coarse Nozzles will work for horizontal or near-horizontal optics, the Medium and Regular Nozzles are able to apply First Contact Polymer faster than the Fine or Coarse Nozzles.

Please see Specification Table for a quick guide on which nozzles to select.

The Fine Nozzles and Coarse Nozzles provide the best spray patterns for vertical or angle optics. The Fine Nozzles offer less flow for controlled application on smaller optics, while the Coarse Nozzles offer faster application on optics larger than 3". While both the Fine and Coarse Nozzles will work for horizontal or near-horizontal optics, the Medium and Regular Nozzles are able to apply First Contact Polymer faster than the Fine or Coarse Nozzles.

Please see Specification Table for a quick guide on which nozzles to select.

The Fine Nozzles and Coarse Nozzles provide the best spray patterns for vertical or angle optics. The Fine Nozzles offer less flow for controlled application on smaller optics, while the Coarse Nozzles offer faster application on optics larger than 3". While both the Fine and Coarse Nozzles will work for horizontal or near-horizontal optics, the Medium and Regular Nozzles are able to apply First Contact Polymer faster than the Fine or Coarse Nozzles.

Please see Specification Table for a quick guide on which nozzles to select.