Camera Accessories

Cables, mounts and interfaces for our range of cameras
Camera Accessories
-
Baumer C-Mount Starter Kit for Colour MX Camera Series
£28.00 £33.60The MX C-Mount Starter kit includes: C-Mount Adapter; Sealings, Screws, Retaining Bracket, Spaces and IR Cut Filter. -
Baumer C-Mount Starter Kit for Mono MX Camera Series
£28.00 £33.60The MX C-Mount Starter kit includes: C-Mount Adapter; Sealings, Screws, Retaining Bracket, Spaces and Cover Glass. -
Baumer Cable Kit for GigE MXG Camera Series
£15.00 £18.00The MXG Cable Kit includes; 1x Cable 3 pole AWG32 one sided preassembled, 150 mm length and 1 x Cable 8 pole AWG32 one side preassembled, 150 mm length. -
Baumer Cable Kit for USB3.0 MXU Camera Series
£8.00 £9.60Baumer offer a process interface cable for their board level cameras, 8 pole female crimp connector, open wires at one end, AWG32, 0.15m in length (Z-ESG JSFV0015). -
Baumer Full Starter Kit For Dual Gige LXG Series Cameras
£458.00 £549.60Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for GigE MXG Series Cameras
£229.00 £274.80Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for GigE TXG Series Cameras
£221.00 £265.20Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for GigE VEXG/VCXG Camera Series
£247.00 £296.40Baumer anticipates the requirement for a solid solution for your camera application requirements, by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for GigE VLG Camera Series
£226.00 £271.20Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for GigE VLG IP Camera Series
£235.00 £282.00Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for USB3.0 MXU Series Cameras
£114.00 £136.80Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Full Starter Kit for USB3.0 VLU Camera Series
£95.00 £114.00Baumer anticipates the requirement for a solid solution for your camera application requirements by bringing together all the accessories to get you going. -
Baumer Heat Sink Kit for GigE MXG Camera Series
£21.00 £25.20Heat Sink for GigE Board Level Camera. Pack Comprises of Screws, Retaining Bracket and thermal conductive pads. -
Baumer Heat Sink Kit for USB3.0 MXU Camera Series
£21.00 £25.20Heat Sink for MXU Board Level Camera. Pack Comprises of Screws, Retaining Bracket and thermal conductive pads. -
Baumer LXG Series Lens Mount Adapter M58 to C-mount
£32.00 £38.40Baumer LXG Series Lens Mount Adapter M58 to C-mount -
Baumer LXG Series Lens Mount Adapter M58 to F-mount
£92.00 £110.40Baumer LXG Series Lens Mount Adapter M58 to F-mount -
Baumer LXG Series Lens Mount Adapter M58 to M42x1-Mount (26.8)
£26.00 £31.20Baumer LXG Series lens mount adapter for M58 to M42x1 Mount with flange focal length of 26.8 mm. -
Baumer LXG Series Lens Mount Adapter M58 to M42x1-Mount (45.5)
£26.00 £31.20Baumer LXG Series lens mount adapter for M58 to M42x1 Mount with flange focal length of 45.5 mm. -
Baumer Protective Tube-I7 Replacement, 44mm
Protective tube for Baumer VLG camera series, length: 44mm -
-
-
Baumer S-Mount Starter Kit for Colour MX Camera Series
£29.00 £34.80THE MX S-Mount Kit includes: S-Mount Adapter, Sealings, Screws, Retaining Bracket and IR Cut Filter. -
Baumer S-Mount Starter Kit for Mono MX Camera Series
£29.00 £34.80THE MX S-Mount Kit includes: S-Mount Adapter, Sealings, Screws, Retaining Bracket and Cover Glass. -
-
-
-
-
Ximea 1 metre USB3.0 Passive Cable for xiC Cameras
Black 1.0 metre USB3.0 cable. Type A to Micro B with horizontal locking screws with a transfer rate of 5Gb per second.
-
Ximea 10 metre USB3.0 Active Cable for xiC Cameras
Black 10.0 metre USB3.0 active repeater cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.
-
Ximea 15 metre USB3.0 Active Cable for xiC Cameras
Black 15.0 metre USB3.0 active repeater cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.
-
Ximea 20 metre USB3.0 Active Cable for xiC Cameras
Black 20.0 metre USB3.0 active repeater cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.
-
Ximea 2x PCI Express Adapter for xiC Cameras
PCI express x1 Gen2 adapter, 2x USB 3.1 ports, asmedia ASM1142
-
Ximea 3 metre Trigger Cable
The Ximea 3.0 metre Trigger Cable is a 3 pole digital I/O circular cable with CPIO Hirose Connector (HRS SR38-4P-3P (71) at one end whilst the other has a pigtail.
-
Ximea 3 metre USB3.0 Angled Passive Cable for xiC Cameras
Black 3.0 metre USB3.0 angled cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.
-
Ximea 4x PCI Express Adapter for xiC Cameras
PCI express x1 Gen2 adapter, 4x USB 3.0 ports, Fresco Logic FL1100
-
Ximea 5 metre Trigger Cable
The Ximea 5.0 metre Trigger Cable is a 3 pole digital I/O circular cable with CPIO Hirose Connector (HRS SR38-4P-3P (71) at one end whilst the other has a pigtail.
-
Ximea 5 metre USB3.0 Passive Cable for xiC Cameras
Black 5.0 metre USB3.0 cable. Type A to Micro B with horizontal locking screws (10 pin Molded Plug) with a transfer rate of 5Gb per second.
-
-
Ximea Cable FPC MQ Flex-Line
Cable FPC MQ Flex-Line, 0.1m can be used for connecting xiC flex line models to carrier board or trough adapter and standard USB 3.0 cable to the host computer. NOTE: Cable have marked ends. It is important to connect the end marked “CAM” to the camera and end marked “BOB” tohost or adapter. Swapped orientation leads to nonoperational state. Connecting camera to powered host can cause destruction of camera. For detaching cable the connector need to be unlocked, otherwise connector soldering may be damaged.
-
Ximea Mounting Bracket for MQ Cameras
The mounting bracket for tripod is made from anodised aluminium, increasing the resistance of the metal to wear. With dimensions of 6.4x28x5.5mm, all corners are chamfered and all drilled holes are thread milled.
-
Ximea Mounting Bracket for MQ Cameras - 37mm diameter
The mounting bracket for tripod is made from anodised aluminium, increasing the resistance of the metal to wear. With dimensions oMQ series tripod mounting bracket thick - for lenses with a diameter > 37 mm Universal xiQ series tripod mounting bracket, 9.5 mm thick.
-
-
Ximea USB2.0 Patch Cable for Subminature MU9 Camera
Ximea USB2.0 Patch Cable 1.0m Flat ribbon cable with USB2.0 and IOs

Shop By