Rigol DP832A Triple Channel DC Power Supply
Rigol DC Power Supply, 195W, triple output, 30V/3A, 30V/3A, 5V/3A.
The Rigol DP832A is a triple channel, remote sense programmable DC Power Supply. It has excellent performance, including various analysis functions and has USB, Ethernet and RS232 connectivity. All of this makes it suitable to meet a wide range of testing requirements.
- Low Ripple Noise: <350 uVrms/2mVpp
- Excellent Linear Regulation Rate and Load Regulation Rate
- Fast Transient Response Time: <50us
- Standard OVP/OCP/OTP protection functions
- Standard Timing function
- Built in V, A, W measurements and waveform display
- Supports Output Delay, Analysis, Monitor and Preset functions
- 3.5 Inch TFT Display
Additional Information
| Total Output Power | 195W |
|---|---|
| No. of Channels | 3 |
|
|
DP800 |
DP900 |
DP2000 |
|
Number of Channels |
1/2/3 |
3 |
3 |
|
Channel-to- channel Isolation |
Partially isolated |
Fully isolated |
Fully isolated |
|
Auto Series/ Parallel Connection |
Not available |
Available (CH1, CH2) |
Available (CH1, CH2) |
|
Screen |
3.5-inch screen |
4.3-inch touch screen |
4.3-inch touch screen |
|
Total Power |
140 W to 200 W |
210 W |
222 W |
|
Output Ripple and Noise |
<350 μVrms/2 mVpp <2 mArms |
<350 μVrms/2 mVpp <2 mArms |
<350 μVrms/2 mVpp <2 mArms |
|
Programming |
CH1, CH2: |
CH1, CH2: |
CH1, CH2: |
|
Readback |
CH1, CH2: |
CH1, CH2: |
CH1, CH2: |
|
Programming Resolution |
1 mV/1 mA[2] |
1 mV/1 mA |
CH1, CH2: 1 mV/0.1 mA CH3: 1 mV/1 mA |
|
Readback Resolution |
0.1 mV/0.1 mA[2] |
0.1 mV/0.1 mA |
0.1 mV/0.1 mA (Low range current: 1 μA) |
|
Command Processing Time |
118 ms |
10 ms[3] |
10 ms[3] |
|
Minimum Dwell Time |
1000 ms |
100 ms (the highest level) |
1 ms (the highest level) |
|
Interface |
USB/LAN/RS232/Digital IO |
USB/LAN/Digital IO |
USB/LAN/RS232/Digital IO |
|
GPIB |
Optional (USB-GPIB) |
Not available |
Optional[4] |
|
Rear Output Terminals |
Available on DP811 and DP813 only (for 1 channel) |
Not available |
Available (for 3 channels) |
|
Weight |
9.75 kg to 10.5 kg |
9.15 kg |
9.95 kg |
|
Dimension (W x H x D) |
239mm×157mm×418mm |
239mm×157mm×419mm |
239mm×157mm×419mm |
Note[1]: Voltage readback/programming accuracy 12 months for DP932U: 0.05%+20 mV.
Note[2]: for DP832A.
Note[3]: the time required for the output to change accordingly after receiving the APPLy and SOURce commands.
Note[4]: The optional GPIB interface can be installed in place of the RS232 interface. Those two interfaces cannot be used concurrently.
Rigol DP800 Series Datasheet
