Dino-Lite N3C-A Coaxial Light Cap for Edge Series
Dino-Lite N3C-A Coaxial Light Cap is a useful accessory for the Dino-Lite Edge models to enhance inspection of surfaces such as silicon wafers, electronic PCB’s, metal, plastics or glass. It is well known that the use of coaxial lighting in microscopy eliminates disturbing shadows making it easier to look inside small holes and scratches in the material you wish to check.
The Dino-Lite N3C-A Axial Light cap is an optional accessory for use with Dino-Lite Edge Series microscope cameras with Longer Working distance. Replace the front cap of a Dino-Lite Edge Series microscope and the coaxial front light is formed by mirroring the light of Dino-Lite with a beam splitter, this helps to highlight scratches and dents on reflective surfaces or to avoid shadow obscured by thick surroundings of deep holes. The compact and interchangeable N3C-A is an ideal supplement for tackling with inspection challenges.
Inside the small front cap of the N3C-A an ingenious mirroring system with a beam splitter has been integrated. The combination of coaxial lighting, a highly sensitive camera and a magnification of up to 140 times makes it possible to visualize even the smallest scratches and dents on any surface.
The Dino-Lite NC3-A coaxial light cap is interchangeable with other caps from the Dino-Lite range. The optimum result can be achieved by using it in combination with a Dino-Lite Edge model from the Long Working Distance range (LWD).
Note: The working distance of Dino-Lite attached with N3C-A will be reduced by 5mm. Some magnification range of standard working distance models could thus be obscured from using. Standard working distance models may function with N3C-A at 225x or less than 50x.
Dimensions: 18.5mm (H) x 30.3mm (D)
Weight: 6g
Compatible with: All Edge models (AM41xx, AM45xx, AM48xx, AM71xx, AM75xx, AM78xx, AM79xx)
Box contains: N3C-A coaxial light cap, Quick start guide
Warranty: 1 year European warranty