PC Oscilloscopes

PicoScope 2204A-D2 10MHz Bandwidth, 2 Channel, 100MS/s, 100KHz AWG, NO PROBES INCLUDED

Please Note: If you require the above 2204A with 2 oscilloscope probes please order PicoScope 2204A at £99 instead.

PicoScope 2204A 10MHz Bandwidth, 2 Channel, 100MS/s, 100KHz AWG includes 2 probes.

The Pico MI007 60MHz ergonomically designed passive oscilloscope probes are suitable for use with most of the PicoScope range of USB Oscilloscopes. Passive probes don't require a power supply or batteries so are lightweight and easily portable.

For a limited time, we are offering the Pico 4824 at a special price and two 60Mhz high-impedance passive probes x1/x10 for absolutely FREE (MI007), worth £36.

Offering eight channels at 12-bit resolution and 20MHz bandwidth with one ADC per channel, the Pico 4824 delivers all the functionality you need to make precision, time-correlated waveform measurements on multiple channels and a wide range of signal types.

The Pico Technology 9200 and 9300 Series offer a low cost alternative for visualising, measuring and characterising your Microwave, RF and Gigabit signals up to 25GHz.

Please call our application engineers on 01582 7646640 to discuss your needs in more detail or to arrange a product demonstration. Alternatively email us at CONTACT to request more information.

• 2 channels
• Up to 25 GHz bandwidth (14 ps rise time calculated)
• 1 MS/s sample rate to 32 kS store
• 64 fs, 15 THz effective sampling rate
• Up to 15 GHz prescaled and 2.5 GHz direct trigger
• Pattern sync trigger of length 7 to 2²³–1
• 1.8 ps typical RMS jitter
• 16 bit ADC resolution

PicoScope 4444 kit. Supplied in a tough carry case with the following accessories offering great value for money.

• High-resolution differential oscilloscope (14-bit)
• Three PicoConnect 442 25:1 high voltage differential probe (1000 V CAT III)
• One TA271 single-ended D9-BNC adaptor.

The Pico Technology MI077 current clamp can measure AC and DC currents up to 600 amps.

PicoScope 4444 standard kit. Supplied in a tough carry case with the following accessories offering great value for money.

It is ideal for use in non-ground-referenced measurements, safe probing of single phase and 3-phase voltages and currents, measuring power drawn by mobile and IoT devices, hybrid and electric vehicle design, motor drives and inverters.

• PicoScope 4444 High-resolution differential oscilloscope (14-bit)
• Three PicoConnect 441, 1:1 passive differential voltage probes
• One TA271 single-ended D9-BNC adaptor. Ref: PQ073.
• Power Supply, USB Lead and hard carry case

Low cost AC / DC current probe with BNC connector 10mA – 60A

PicoScope 2207B PC Oscilloscope 2 channels with FG/AWG, 70MHz, 64MS Buffer Memory, with probes and accessories

• 2 channel, 4 channel and MSO models
• 6 instruments in one
• Ultra-compact design
• Up to 100 MHz bandwidth
• Up to 128 MS buffer memory
• Decode 15 serial protocols as standard
• USB connected and powered
• Windows, Linux and Mac software

PicoScope 2206B PC Oscilloscope 2 channels with FG/AWG, 50MHz, 32MS Buffer Memory, with probes and accessories

• 2 channel, 4 channel and MSO models
• 6 instruments in one
• Ultra-compact design
• Up to 100 MHz bandwidth
• Up to 128 MS buffer memory
• Decode 15 serial protocols as standard
• USB connected and powered
• Windows, Linux and Mac software

The TA133 is a high-impedance passive probe with 500 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA133 has been compensated to ensure optimal performance with the PicoScope 6404 oscilloscopes.

The Pico Technology TA150 is a high-impedance passive probe with 350 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA150 has been compensated to ensure optimal performance with the PicoScope 6402 and 6403 oscilloscopes.

The Pico Technology TA325 is a 3-phase AC current probe utilizing the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors.

The Pico Technology TA325 is a 3-phase AC current probe utilizing the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors.

The Pico Technology TA189 30 A high-precision current probe is for applications requiring non-intrusive current measurement, using closed-loop Hall effect technology to measure both AC and DC current with high stability over long periods of time.

The Pico Technology TA019 current clamp can measure AC and DC currents up to 600 amps.

The Pico Technology TA009 current probe can measure currents from 10 mA up to 60 A with a switch selectable high and low range.

The Pico Technology TA138 is a current clamp for AC-only current measurements. Its single range is capable of measurements from 0.1 A to 200 A. Ideally suited for use with the PicoLog CM3. Fitted with 4 mm (banana) plug type connectors.

The Pico Technology TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000 A.

• 2 channel, 4 channel and MSO models
• 6 instruments in one
• Ultra-compact design
• Up to 100 MHz bandwidth
• Up to 128 MS buffer memory
• Decode 15 serial protocols as standard
• USB connected and powered
• Windows, Linux and Mac software

PicoScope 2405A 25MHz Bandwidth, 4 Channel, 500MS/s, 1MHz AWG includes 4 probes.

• 2 channel, 4 channel and MSO models
• 6 instruments in one
• Ultra-compact design
• Up to 100 MHz bandwidth
• Up to 128 MS buffer memory
• Decode 15 serial protocols as standard
• USB connected and powered
• Windows, Linux and Mac software

PicoScope 2406B 50MHz Bandwidth, 4 Channel, 1GS/s, 1MHz AWG includes 4 probes.

• 2 channel, 4 channel and MSO models
• 6 instruments in one
• Ultra-compact design
• Up to 100 MHz bandwidth
• Up to 128 MS buffer memory
• Decode 15 serial protocols as standard
• USB connected and powered
• Windows, Linux and Mac software

PicoScope 2407B 70MHz Bandwidth, 4 Channel, 1GS/s, 1MHz AWG includes 4 probes.

• 2 channel, 4 channel and MSO models
• 6 instruments in one
• Ultra-compact design
• Up to 100 MHz bandwidth
• Up to 128 MS buffer memory
• Decode 15 serial protocols as standard
• USB connected and powered
• Windows, Linux and Mac software

PicoScope 4262 is a 16bit precision 5 MHz 2 channel high resolution scope & AWG. The 16bit front end allows the user to perform Fast Fourier Transform (FFT) measurements with 96dB of dynamic range with mHz resolution at an affordable price.

• Dual channel oscilloscope / spectrum analyser
• 16-bit resolution
• Low distortion (96 dB SFDR)
• Low noise (8.5 µV RMS)
• 5 MHz bandwidth
• 16 MS buffer memory
• Low-distortion 20KHz signal generator (102 dB SFDR)
• USB powered