Skip to the beginning of the images gallery

GGB Picoprobe Calibration Substrate CS-5, CS-8, CS-9, CS-10, CS-11, CS-14, CS-15, CS-17, CS-18

Product Code:

66093

Manufacturer: GGB Industries

The GGB Industries, Inc., line of CALIBRATION SUBSTRATES allows the user to calibrate any GGB Industries, Inc., microwave Picoprobe® at the probe tip. The underlying principal of the calibration of a measurement system is to provide accurate known standards to which the measurement system can be connected. Each calibration substrate contains highly precise elements for calibrating out the unavoidable errors and losses in a microwave network analyser, its associated cabling, and the microwave probe to ensure accurate on-wafer testing.

Supports Precise SOLT, LRL/TRL, and LRM/TRM calibrations
Includes CalKit software for easy loading to Network Analyser
Wide pitch range from 30 to 2,540 microns
Suitable for all Picoprobes® from DC to 220 GHz
Available for GS, SG, GSG Footprints
Convenient alignment structures
Individually tested and trimmed to exacting standards

Description

The range of calibration substrates from GGB Picoprobe allow accurate, easy to use calibration substrates, calibration coefficients, and detailed instructions allow you to correct the measurement system (network analyser + cabling + probe) whenever it produces a reading different than the standard.

The typical elements for calibrating a microwave measurement system consists of opens, shorts, matched loads and throughs. These four elements have electrical characteristics that are very different from one another so that each element contributes an important part to the overall calibration process. In principle any set of standards could be employed, however, the more identical the standards are, the less accurate the calibration process becomes, which in turn results in inaccurate the on-wafer testing. Our precision crafted calibration substrates, when properly used, assure you of accurate on-wafer test results.

How to select the correct calibration substrate for your probing application(s):

Identify your Picoprobe's footprint and pitch (tip spacing);
Determine which calibration type is appropriate for your application (SOLT, LRL/TRL, or LRM/TRM)*;
Using the Calibration Substrate Selection Guide, choose the calibration substrate which matches your Picoprobe's footprint, recommended pitch range, and your preferred calibration type.

Description	Lambda Part No.
CS-5 GSG Calibration Substrate	66093
CS-8 GSG Calibration Substrate	67746
CS-9 GSG Calibration Substrate	66669
CS-10 GSG Calibration Substrate	66615
CS-15 GSG Calibration Substrate	66092
CS-8 GS-SG Calibration Substrate	67746
CS-11 GS-SG Calibration Substrate	72890
CS-14 GS-SG Calibration Substrate	72889
CS-17 GS-SG Calibration Substrate	72891
CS-15 100GHz Calibration Substrate	66092

Specifications

Calibration Substrate Selection Guide
Calibration Substrate	Pad Size (microns)	Calibration Types Supported	Footprint	Pitch Range Recommended (microns)	Pitch Range Acceptable (microns)
CS-5	50 X 50	SOLT, LRL, LRM	GSG	75 - 250	75 -250
CS-9	100 X 100	SOLT, LRL, LRM	GSG	250 - 600	150 - 600
CS-10	150 X 150	SOLT, LRM	GSG	600 - 1250	225 - 1250
CS-18	300 X 300	SOLT, LRM	GSG	1250 - 2540	500 - 2540
*FIGURE 2*

CS-8	50 X 50 100 X 100 150 X 150	SOLT, LRM	GS, SG	50 - 200	50 -300
CS-14	100 X 100	SOLT, LRM	GS, SG	200 - 400	150 - 600
CS-11	150 X 150	SOLT, LRM	GS, SG	400 - 1250	175 - 1250
CS-17	300 X 300	SOLT, LRM	GS, SG	750 - 2540	450 - 2540
*FIGURE 3*

Special Calibration Substrate Designed For Use Above 110 GHz
Calibration Substrate	Pad Size (microns)	Calibration Types Supported	Footprint	Pitch Range Recommended (microns)	Pitch Range Acceptable (microns)
CS-15	25 X 25	SOLT, LRL, LRM	GSG	40 - 150 (SOLT) 30 - 150 (LRL)	40 - 150
*FIGURE 4*

* SOLT = Short-Open-Load-Through

LRL = Line-Reflect-Line (Which is equivalent to TRL = Through-Reflect-Line)
LRM = Line-Reflect-Match (Which is equivalent to TRM = Through-Reflect-Match)

Differential Calibration Substrate Selection Guide GSGSG
Calibration Substrate	Pad Size (microns)	Calibration Types Supported	Footprint	Recommended Pitch (microns)	Acceptable Pitch (microns)
CS-2-50	25 X 25	SOLT, LRL LRM	GSGSG	50	45-55
CS-2-75	25 X 25	SOLT, LRL LRM	GSGSG	75	70-80
CS-2-100	50 X 50	SOLT, LRL LRM	GSGSG	100	90 - 110
CS-2-125	50 X 50	SOLT, LRL LRM	GSGSG	125	115 - 135
CS-2-150	50 X 50	SOLT, LRL LRM	GSGSG	150	140 -160
CS-2-200	50 X 50	SOLT, LRL LRM	GSGSG	200	190 - 210
CS-2-225	50 X 50	SOLT, LRL LRM	GSGSG	225	215 - 235
CS-2-250	50 X 50	SOLT, LRL LRM	GSGSG	250	240 -260
CS-2-300	100 X 100	SOLT, LRL LRM	GSGSG	300	275 - 325
CS-2-350	100 X 100	SOLT, LRL LRM	GSGSG	350	325 - 375
CS-2-400	100 X 100	SOLT, LRL LRM	GSGSG	400	375 - 425
CS-2-450	100 X 100	SOLT, LRL LRM	GSGSG	450	425 - 475
CS-2-500	100 X 100	SOLT, LRL LRM	GSGSG	500	490 - 510
CS-2-750	150 X 150	SOLT, LRL LRM	GSGSG	750	700 - 800
CS-2-1000	150 X 150	SOLT, LRL LRM	GSGSG	1000	990 - 1010
CS-2-1250	150 X 150	SOLT, LRL LRM	GSGSG	1250	1225 - 1275
*FIGURE 5*

GSSG
Calibration Substrate	Pad Size (microns)	Calibration Types Supported	Footprint	Recommended Pitch (microns)	Acceptable Pitch (microns)
CS-3-50	25 X 25	SOLT, LRM	GSSG	50	45-60
CS-3-75	25 X 25	SOLT, LRM	GSSG	75	65-85
CS-3-100	50 X 50	SOLT, LRM	GSSG	100	85 - 115
CS-3-125	50 X 50	SOLT, LRM	GSSG	125	110 - 140
CS-3-150	50 X 50	SOLT, LRM	GSSG	150	135 -165
CS-3-175	50 X 50	SOLT, LRM	GSSG	175	160 - 190
CS-3-200	50 X 50	SOLT, LRM	GSSG	200	185 - 215
CS-3-250	100X 100	SOLT, LRM	GSSG	250	200 - 300
CS-3-350	100 X 100	SOLT, LRM	GSSG	350	300 - 400
CS-3-450	100 X 100	SOLT, LRM	GSSG	450	400 - 500
CS-3-500	150 X 150	SOLT, LRM	GSSG	500	425 - 525
CS-3-600	100 X 100	SOLT, LRM	GSSG	600	550 - 625
CS-3-800	300 X 300	SOLT, LRM	GSSG	800	600 - 1000
CS-3-1000	300 X 300	SOLT, LRM	GSSG	1000	800 - 1075
CS-3-1250	300 X 300	SOLT, LRM	GSSG	1250	1050 - 1325
*FIGURE 6*

SGS
Calibration Substrate	Pad Size (microns)	Calibration Types Supported	Footprint	Recommended Pitch (microns)	Acceptable Pitch (microns)
CS-4-100	50 X 50	SOLT, LRM	SGS	150	90 - 110
CS-4-150	50 X 50	SOLT, LRM	SGS	150	140 - 160
CS-4-250	100 X 100	SOLT, LRM	SGS	250	225 - 275
CS-4-300	100 X 100	SOLT, LRM	SGS	300	275 - 325
CS-4-350	100 X 100	SOLT, LRM	SGS	350	325 - 375

Downloads

PicoProbe Calibration Substrate Datasheet

PicoProbe Catalogue

GGB CS-5 Calibration Substrate Instructions

GGB CS-8 Calibration Substrate Instructions

EverBeing Product Catalogue

Reviews

Write Your Own Review

Photo	Product	Price
	LAMBDA 25 Piece RF Adapter Kit	92.00
	EverBeing EB-6V MMWAVE THz Wafer Probe Station	>
	EverBeing EB-6A MMWAVE THz Wafer Probe Station	>
	EverBeing C-2 RF Probe Station	4,358.00
	GGB Picoprobe Model 40A High Performance Microwave Probes	>
	GGB Picoprobe Dual Differential Microwave Probe	>
	GGB Picoprobe Multi-Contact Wedge Probe	>
	GGB Picoprobe Model 67A High Performance Microwave Probes	>
	RF Precision Adapter, N-Type Male to SMA Female, 18GHz, 50Ω, VSWR ≤1.15:1	38.00
	EverBeing Low Leakage Triaxial Cable (3.0 m) Triax	307.00
	EverBeing Low Leakage Triaxial Cable (2.0 m) Triax	258.00
	EverBeing Low Leakage Triaxial Cable (1.5 m) Triax	280.00
	EverBeing Low Leakage Triaxial Cable (1.0 m) Triax	128.00
	EverBeing SMA Cable, SMA Plug(M) to SMA Plug(M) 18GHz (1.5m) RF	49.00
	EverBeing Low Leakage Triaxial Cable (0.9 m) Triax	255.00

GGB Picoprobe Calibration Substrate CS-5, CS-8, CS-9, CS-10, CS-11, CS-14, CS-15, CS-17, CS-18

More info and finance questions

Request a Quote

Company

Support

Contact Us