All LATAB light heads require a controller.
The strobe mode controllers are microprocessor based and specially designed to control all types of LATAB lighting heads. Like the lighting heads, they come in a black aluminium housing. The controller is enabled for plug and play. Just connect the LATAB lighting head and the controller automatically identifies the lighting type by an electronic sensor and gives the maximum light intensity to the lighting head.
The strobe pulse is adjustable in 16 steps. The light intensity can also be adjusted. Increasing the light intensity up to 200% at 50 and 100 μsec strobes can be selected by internal jumper. The controllers are supplied with a 5 m power/trigger cable.
To identify the correct controller unit for your lighting head(s) please download LATAB Controller Selection datasheet from the Downloads tab.
Additional Information
Intensity | Ethernet |
---|---|
No. of Channels | 4 |
Photo | Product | SKU | Intensity | No. of Channels | |
---|---|---|---|---|---|
LATAB PAD1 1131-8 | - | Internal potentiometer | 1 | > | |
LATAB PAD1 1131-24 | - | Internal potentiometer | 1 | > | |
LATAB PAD1 1141-8 | - | 0 - 10 V | 1 | > | |
LATAB PAD1 1231-8 | - | Internal potentiometer | 2 | > | |
LATAB PAD1 1431-8 | - | Internal potentiometer | 4 | > | |
LATAB PAD1 1132-8 | - | RS-232 | 1 | > | |
LATAB PAD1 1132-24 | - | RS-232 | 1 | > | |
LATAB PAD1 1432-8 | - | RS-232 | 4 | > | |
LATAB PAD1 4132-8 | - | Ethernet | 1 | > | |
LATAB PAD1 4132-24 | - | Ethernet | 1 | > | |
LATAB PAD1 4232-8 | - | Ethernet | 2 | > |