Home Melting Point Apparatus SRS MPA160 Digital Melting Point System

SRS MPA160 Digital Melting Point System

Availability: In stock


Product Code:
22807
Manufacturer: Stanford Research Systems
Special Price £1,345.39 £1,614.47 Regular Price £1,664.40
  • Fast, safe, reliable measurements 
  • Mercury free
  • Built-in digital thermometer
  • Microprocessor controlled ramps
  • Ramp rates from 0.5 to 20°C/min
  • Easy to clean and maintain
  • Tube tapper packs samples
  • NRTL safety certified

More info and finance questions

Lambda Exclusive Promotion:
Additional 12 months warranty for free (2 years total) via our UK Service Centre.

The Stanford Research Systems DigiMelt is a modern, low cost, digital melting point apparatus designed specifically for the student lab. Students learn the visual detection capillary method of melting point determination without the frustration of trying to control the oven temperature. SRS DigiMelt rapidly heats the oven to the programmed start temperature, then ramps at the specified rate. The student carefully observes the samples and records the melting points with a touch of a button.

Digital Temperature Readout
DigiMelt incorporates a platinum resistance temperature detector (RTD) instead of the usual mercury thermometer. This means better accuracy on the readings, and no more mercury cleanup from broken thermometers. The RTD is encased inside the oven block making it virtually unbreakable.

Microprocessor Temperature Control
Some student instruments use a large knob that simply throttles power to the oven without any sense of what the target temperature is. DigiMelt uses an RTD for feedback, so it "knows" the oven temperature. This means the students can enter a start temperature, a ramp rate, and a stop temperature and the microprocessor takes care of the rest. Furthermore, the microprocessor can deliver variable amounts of power to the oven, so it can quickly ramp to the starting temperature, then perform the ramp as slowly as 0.5ºC/min.

High Quality Optics
Rather than forcing the student to peer through a tiny lens with poor illumination, the DigiMelt uses a large magnifier that allows plenty of eye relief. The user can see all three capillaries easily at a comfortable distance from the instrument. White LEDs are used to provide high-contrast illumination.

Tube Tapper
For many students, the melting point lab is the first time they have touched a capillary. This can lead to lots of capillaries on the floor and many broken capillaries. DigiMelt employs an integral cell phone vibrator motor to let students pack their sample without tapping them on the bench or dropping them through a long glass tube. A molded guide in the chassis allows students to pack three samples at a time.

Easy Maintenance
Cleaning the lens is as simple as removing the lens retaining ring. If a student should break a capillary, the entire lens holder assembly slides out for easy clean up of the broken glass. Replacing thermometers is a thing of the past as the RTD will never break and cannot be removed from the instrument. Unlike conventional incandescent bulbs that must be periodically replaced in some student instruments, the white LEDs used in DigiMelt will last a lifetime.

Safer for Students
The DigiMelt uses an internal RTD thermometer, which means students and TAs are never exposed to toxic mercury vapors. Some student instruments will reach 500°C and stay at that temperature indefinitely — a severe burn hazard. The DigiMelt’s maximum temperature is 260°C, which allows testing of virtually all organic compounds a student might examine. Intelligently designed cowling protects students from touching the hot oven. Furthermore, the oven will automatically turn off after being idle for 30 minutes.

Display
Type 4 digit LED
Readout Start, stop or ramp rate, oven temperature, and stored measurement data
Temperature
Resolution 0.1 °C
Accuracy ±(0.45+0.0045T) where T is temperature in Centigrade
Typical: ±0.6 °C (
Reproducibility 0.2 °C
Oven
Range 50 °C to 260 °C
Ramp rate 0.5, 1.0, 2.0, 5.0, 10, 20 °C per minute
Heat-up time (typ.)    2.5 minutes to 100 °C, 6.5 minutes to 250 °C
Thermometer Built in Pt RTD
Temperature control Closed-loop PID
Safety shut off Automatic after 30 minutes idle
Capillaries
Dimensions 1.4 mm to 1.8 mm outside dia., 100 mm length
Capacity Up to 3 tubes
Fill height   2 mm to 3 mm
Sample packing Automatic (tube tapper)
General
Power
   MPA160 100 to 132 VAC, 50 to 60 Hz, 1 A, 75 W nominal
   MPA161 200 to 250 VAC, 50 to 60 Hz, 1/2 A, 75 W nominal
Environment 0 °C to 30 °C, non-condensing
Humidity <90%
Weight    2 lbs.
Dimensions 6.5"× 9.5"× 5.25" (WHD)
Write Your Own Review
You're reviewing:SRS MPA160 Digital Melting Point System
Your Rating
Photo Product SKU
SRS MPA100 OptiMelt Melting Point Apparatus SRS MPA100 OptiMelt Melting Point Apparatus - >
SRS O100MPC Melting Point Spare Capillaries SRS O100MPC Melting Point Spare Capillaries - >