Tempo 180XL Visual Fault Locator
£106.00 £127.20
- Continuous wave output mode for steady fault illumination
- Blinking output mode increases viewing contrast
- Easy to use “Quick Connect” interface fits all 2.5mm fibre optic connectors
- Ergonomic switch permits easy one-handed operation
- Simple, versatile, and user-friendly design
- Rugged, compact, and splash proof aluminium housing
- High output 1.0mW (0dBm) 650nm red laser
- Up to 7km range
- Two AA-size alkaline batteries provide 80 hours of continuous operation
- Nylon belt holster included
Locating Breaks and Bending Losses
The Tempo 80XL visual fault finder is an indispensable tool for quickly identifying bending losses and breaks in optical fibres. If a fibre is bent too tightly, red laser light will be seen escaping through the jacket. Likewise, if a fibre is broken, escaping light will be visible where the break is located.
Identifying Bad Ceramic Connectors
Ceramic connectors are easily tested using the 180XL visual fault finder. A fibre broken inside, or past, the ferrule will cause it to glow. If the whole connector glows, it is definitely defective. If the end face polish of the connector is bad, light will be reflected internally. This will also make the ferrule glow when the 180XL is used.
Specifications | |
Wavelength | 650nm ± 10nm |
Emitter Type | Fabry Perot |
Output Power | 0dBm |
Spectral Width (CPR) | <2nm |
Laser Classification | 2 |
Range | 7km |
Modes of Operation | CW and 2Hz Modulation |
Method of Display Operation | Red/Green LED |
Fibre Type | Singlemode, Multimode |
Connector Interface | 2.5mm Universal, Optional 1.25mm adapter |
Battery | AA (2) |
Battery Life | 80 Hours with 3.9Wh batteries |
Weight | 0.15lbs (70g) (not including batteries) |
Dimensions | 180 x 23mm Diamater |
Operating Temperature | (-10 to +45°C) |
Storage Temperature | (-40 to +70°C) |
Certifications | CE, WEEE, CDRH Reach RoHS |
Write Your Own Review
Photo | Product | Price |
---|