Tempo FSP200-EU Optical Fusion Splicer
- Core Alignment - Low splice loss Technology for the most complex fibre geometries.
- Compact - Small and lightweight for the most demanding jobs.
- IP52 Ingress Protection Rating - Resistant to dust and water.
- Versatile - Uses the proprietary loose tube adapters for splicing loose tube fibres to splice on connectors.
- Adaptable - Splices 200 micron “Micro” fibres.
The FSP200 optical fusion splicer uses core alignment technology, which allows the technician to reliably fuse fibre optic cables with low splice losses in as little time as seven seconds. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTTx, P2P installations, and all standard fibres are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fibre applications.
The FSP200 uses the Tempo Communications Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure prone mechanical connector. Splice on connectors also allow for easier fibre routing, which reduces fibre preparation since the splice on connector is pre-cleaved and eliminates the need for a splice tray.
| Model: | FSP200 |
| Applicable Fibres: | SM (6.652), MM (6.651), DS (6.6523), NZDS (6.655), BIF (6.657), EDF |
| Fibre Cleaved Length: | 10mm |
| Cladding Diameter: | 80 to 150μm |
| Coating Diameter: | 100 to 150μm |
| Fibre Count: | Single |
| Fibre Aligning Method | Core Alignment |
| Splice Loss (typical): | 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (NZDS & BIF) |
| Splicing Mode: | 60 Preset / User Definable Modes |
| Splice Time (typical): | 7 seconds(1) |
| Boot Time: | 5 seconds |
| Number of Splices Per Battery Charge: | 200 (including 60mm heat shrink cycle) (2) |
| Splice-On-Connector: | SC, LC, FC, ST |
| Arc Calibration Mode: | Automatic and Manual |
| Protection Sleeve Length: | 60mm, 40mm, Micro Sleeves |
| Ingress Protection (3): | IPSC(Dust), IPX2 (Water) |
| Storage of Splice Results: | 5,000 Results, 100 Screenshots |
| Drop Test: | 76cm on five axis |
| Tension Test: | 2N |
|
Fibre Dislay Magnification: |
200X |
| Tube Heating Mode: |
20 Preset/User Definable Modes |
|
Tube Heating Time (typcal): |
18 seconds(4) |
| Attenuator Mode: | 0.1 to 15 dB |
| Electrode Life: | 5,000 Splices |
| Display: | 3.5” Colour, Turn-Over LCD |
|
Connectivity: |
USB |
| Operating Conditions: |
Pressure: 0 to 16,404 feet |
| Storage Conditions: |
Temperature: -40 to +158F |
| Power Supply: |
100 to 240V AC Adapter; |
| Weight: | 1.7kg (3.74lbs) with battery |
| Dimensions (HxWxD): | 125 x 125 x 135mm (4.9” x 4.9” x 5.3”) |
| Vibration Resistance: |
10Hz – 500Hz with a spectral density of 0.03g2/Hz |
| Password Protection: | Yes |
(1) Fast mode.
(2) 90s/cycle splice time and power save functions activated. Number of cycles may vary depending on battery status and ambient operating conditions.
(3) Dust resistance and rain resistance test do not guarantee that the product will not be damaged under these conditions.
(4) Dependent on splice protector used and ambient conditions. Time quoted is with power mode enabled and assuming that the oven is not cold.
Specifications subject to change without notice.
Application Note: Splicer & Connector Decision Tree
Tempo Optical Fusion Splicers Datasheet
Tempo Splicers Maintenance Datasheet
| Photo | Product | SKU | |
|---|---|---|---|
 | Tempo FCL200 Optical Fibre Cleaver | - | > |
 | Tempo 915FS Active Cladding Optical Fusion Splicer | - | > |
 | Tempo 915CL Optical Fibre Cleaver | - | > |