Pico Technology was established in 1991 and soon became a leader in the field of PC Oscilloscopes and data loggers. Pico has always been recognised for providing innovative, cost-effective alternatives to traditional test equipment and data acquisition products. In doing so, they have made high-quality instrumentation affordable.
With 24-bit resolution the ADC-24 USB data logger is able to detect small signal changes. Features such as true differential inputs, galvanic isolation and software-selectable sampling rates all contribute to a superior noise-free resolution and ensure that your measurements are reliable and accurate.
Supplied with FREE terminal board PP310 worth £29.00.
The Pico MI007 is a 60 MHz low-cost, general-purpose passive high-impedance oscilloscope probe designed for use with oscilloscopes. Supplied as a pack of two.
It is calibrated to work effectively with instruments that have an input impedance of 1 MΩ. A two-position slide switch on the probe handle allows the attenuation ratio to be switched between 10:1 and 1:1.
The MI031 is a 2 metre (6.6 ft) BNC plug to crocodile clip cable for making temporary connection to terminals. Terminated with red and black colour-coded crocodile clips
For a limited time only, purchase the Pico TC 08 and receive 2 Pico Type K, exposed tip, 1 meter, PTFE Insulated Thermocouple Sensors absolutely free of charge! (worth £14) Choose from the dropdown box below:
Temperature measurement and logging. Monitor between 1 and 8 thermocouples, and you are ready to go. The Pico Technology TC-08 Thermocouple Data Logger offers industry–leading performance and is an inexpensive answer to your temperature measuring needs.
The PicoLog CM3 is a three-channel data logger that uses industry-standard current clamps. Simply connect to your PC via USB or Ethernet, run the supplied software and you can monitor and log current for a wide range of applications.
The PicoLog CM3 is a three-channel data logger that uses industry-standard current clamps. If you require the CM3 supplied with three (3) TA138 AC current clamps, please see product 40459.
Simply connect to your PC via USB or Ethernet, run the supplied software and you can monitor and log current for a wide range of applications.
The ultra-compact Pico Technology PicoScope 2204A has 10MHz Bandwidth, 2 Channel, 100MS/s, 8kS memory and 100KHz AWG. Also includes 2 probes.
The Ultra-compact PicoScope 2204A - D2 has 10MHz Bandwidth, 2 Channel, 100MS/s, 8kS memory and 100KHz AWG. NO PROBES INCLUDED
Please Note: If you require the above 2204A with 2 oscilloscope probes please order PicoScope 2204A at £99 instead.
The ultra-compact Pico Technology PicoScope 2205A has 25MHz Bandwidth, 2 Analog and 16 Digital Channels, 200MS/s, 16kS memory and 100KHz AWG. Also includes 2 probes.
The ultra-compact Pico Technology PicoScope 2205A-D2 has 25MHz Bandwidth, 2 Channel, 200MS/s, 16kS memory and 100KHz AWG. NO PROBES INCLUDED
Please Note: If you require the above 2205A with 2 oscilloscope probes please order PicoScope 2205A at £159 instead.
The Ultra-compact PicoScope 2206B has 50MHz Bandwidth, 2 Analog and 16 Digital Channels, 500MS/s, 32MS memory and 1MHz AWG. Also includes 2 probes.
The Ultra-compact PicoScope 2206B has 50MHz Bandwidth, 2 Analog Channels, 500MS/s, 32MS memory and 1MHz AWG. Also includes 2 probes.
The ultra-compact Pico Technology PicoScope 2207B has 70MHz Bandwidth, 2 Analog and 16 Digital Channels, 1GS/s, 64MS memory and 1MHz AWG. Also includes 2 probes.
The ultra-compact Pico Technology PicoScope 2207B has 70MHz Bandwidth, 2 Analog Channels, 1GS/s, 64MS memory and 1MHz AWG. Also includes 2 probes.
The NEW 2208B has deeper memory and faster sampling that the previous 2000A models.
The ultra-compact Pico Technology PicoScope 2405A has 25MHz Bandwidth, 4 Channel, 500MS/s, 48kS memory and 1MHz AWG. Also includes 4 probes.
The ultra-compact Pico Technology PicoScope 2406A has 50MHz Bandwidth, 4 Channel, 1GS/s, 32MS memory and 1MHz AWG. Also includes 4 probes.
The ultra-compact Pico Technology PicoScope 2407A has 70MHz Bandwidth, 4 Channel, 1GS/s, 64MS memory and 1MHz AWG. Also includes 4 probes.
The ultra-compact Pico Technology PicoScope 2408B has 100MHz Bandwidth, 4 Channel, 500MS/s, 128MS of memory and 10MHz AWG.
Includes:
The PicoScope 3000E Series achieves several “firsts” for USB powered scopes: first to 500 MHz, first to 5 GS/s sampling, first with over 1 GS of buffer memory.
The PicoScope 3000E Series achieves several “firsts” for USB powered scopes: first to 500 MHz, first to 5 GS/s sampling, first with over 1 GS of buffer memory.
Pack contents:
The Picoscope 4262 offers a high resolution (16 bits) and a high DC accuracy making them an excellent choice for noise, vibration, precision electronics and mechanical analysis.
PicoScope 4262 is a 16bit precision 5 MHz 2 channel high resolution scope & AWG. The 16bit front end allows the user to perform Fast Fourier Transform (FFT) measurements with 96dB of dynamic range with mHz resolution at an affordable price.
Pack contents:
At the heart of every Pico Technology PicoScope 4444 is an advanced oscilloscope that offers everything you would expect and much more.
Supplied in a tough carry case with the following accessories offering great value for money.
At the heart of every Pico Technology PicoScope 4444 is an advanced oscilloscope that offers everything you would expect and much more.
It is ideal for use in non-ground-referenced measurements, safe probing of single phase and 3-phase voltages and currents, measuring power drawn by mobile and IoT devices, hybrid and electric vehicle design, motor drives and inverters.
Supplied in a tough carry case with the following accessories offering great value for money.
The PicoScope 4000A Series of PC oscilloscopes is a second-generation upgrade and expansion of Pico Technologies high-resolution, deep-memory product portfolio. The 4824A offers 8 Channels at 20MHz bandwidth, 256 MS Memory depth with a 80 MS/s sampling rate.
The Picoscope 4824A 8 channel 20MHz oscilloscope is supplied with four TA375 100MHz oscilloscope probes, additional TA375 probes are available product code 66255.
Click below to add a Lambda Photometrics exclusive promotion.
The Pico Technology PicoScope 5444D with FlexRes® allows you to easily switch from 8 to 16 bits in the same oscilloscope.
The PicoScope® 5000 Series FlexRes® Oscilloscopes offer flexible resolution with 16-bit accuracy when you need it. The Pico Technology PicoScope 5444D MSO has 200MHz Bandwidth, 4 Analog and 16 Digital Channels, 1GS/s, 512MS memory and a 20MHz built-in AWG.
The New PicoScope 6000E Series Flexible Resolution oscilloscope offers user selectable 8 bits of vertical resolution, with 300 bandwidth 1 GS/s sampling rate. Four analog channels have the timing and amplitude resolution you need to reveal signal integrity issues such as glitches, runts, dropouts, noise, distortion and ringing. Add 8 or 16 digital MSO channels to enable the debug and verification of complex ECUs and FPGA-based designs. Supplied with four P2056 10:1 Passive probes.
Available with no oscilloscope probes less £538 or with 2 probes at less £269
The New PicoScope 6000E Series Flexible Resolution oscilloscope offers user selectable 8 bits of vertical resolution, with 300 MHz bandwidth 1 GS/s sampling rate. Four analog channels have the timing and amplitude resolution you need to reveal signal integrity issues such as glitches, runts, dropouts, noise, distortion and ringing. Add 8 or 16 digital MSO channels to enable the debug and verification of complex ECUs and FPGA-based designs. Supplied with four P2056 10:1 Passive probes.
Available with no oscilloscope probes less £538 or with 2 probes at less £269
The PicoScope 6000E Series fixed-resolution and FlexRes mixed-signal oscilloscopes provide 8 to 12 bits of vertical resolution, with up to 1 GHz bandwidth and 5 GS/s sampling rate. Models with four or eight analogue channels have the timing and amplitude resolution you need to reveal critical signal integrity issues such as timing errors, glitches, dropouts, crosstalk and metastability issues.
The PicoScope 6000E Series fixed-resolution and FlexRes mixed-signal oscilloscopes provide 8 to 12 bits of vertical resolution, with up to 1 GHz bandwidth and 5 GS/s sampling rate. Models with four or eight analogue channels have the timing and amplitude resolution you need to reveal critical signal integrity issues such as timing errors, glitches, dropouts, crosstalk and metastability issues.
The New PicoScope 6000E Series Flexible Resolution oscilloscope offers user selectable 8 bits of vertical resolution, with 300 MHz bandwidth 1 GS/s sampling rate. Four analog channels have the timing and amplitude resolution you need to reveal signal integrity issues such as glitches, runts, dropouts, noise, distortion and ringing. Add 8 or 16 digital MSO channels to enable the debug and verification of complex ECUs and FPGA-based designs. Supplied with four P2056 10:1 Passive probes.
Available with no oscilloscope probes less £538 or with 2 probes at less £269
The PicoScope 6000E Series fixed-resolution and FlexRes mixed-signal oscilloscopes provide 8 to 12 bits of vertical resolution, with up to 1 GHz bandwidth and 5 GS/s sampling rate. Models with four or eight analogue channels have the timing and amplitude resolution you need to reveal critical signal integrity issues such as timing errors, glitches, dropouts, crosstalk and metastability issues.
The PicoScope 6000E Series fixed-resolution and FlexRes mixed-signal oscilloscopes provide 8 to 12 bits of vertical resolution, with up to 1 GHz bandwidth and 5 GS/s sampling rate. Models with four or eight analogue channels have the timing and amplitude resolution you need to reveal critical signal integrity issues such as timing errors, glitches, dropouts, crosstalk and metastability issues.
The New PicoScope 6000E Series Flexible Resolution oscilloscope offers user selectable 8 bits of vertical resolution, with 500 MHz bandwidth and 5 GS/s sampling rate. Eight analog channels have the timing and amplitude resolution you need to reveal signal integrity issues such as glitches, runts, dropouts, noise, distortion and ringing. Add 8 or 16 digital MSO channels to enable the debug and verification of complex ECUs and FPGA-based designs. Supplied with four P2056 10:1 Passive probes.
Available with no probes for £7,457
The New PicoScope 6000E Series Flexible Resolution oscilloscope offers user selectable 8, 10 or 12 bits of vertical resolution, with 500 MHz bandwidth and 5 GS/s sampling rate. Eight analog channels have the timing and amplitude resolution you need to reveal signal integrity issues such as glitches, runts, dropouts, noise, distortion and ringing. Add 8 or 16 digital MSO channels to enable the debug and verification of complex ECUs and FPGA-based designs. Supplied with four P2056 10:1 Passive probes.
The Pico Technology 9200 and 9300 Series offer a low cost alternative for visualising, measuring and characterising your Microwave, RF and Gigabit signals up to 25GHz.
Please call our application engineers on 01582 7646640 to discuss your needs in more detail or to arrange a product demonstration. Alternatively email us at CONTACT to request more information.
The new Pico Technology 16GHz SXRTO (Sampler eXtended Real Time Oscilloscope) is the first oscilloscope to combine the benefits of real-time sampling, equivalent-time sampling and high analogue bandwidth. The 9404-16 delivers an impressive 16GHz real time, 4 channel oscilloscope at 12 Bit vertical resolution and 5 TS/s ETS.
Pulse, Eye Diagram and Mask Testing to defined standards at 70 ps or 3 Gb/s as standard.
The Pico Technology Pico AS108 is a full-function USB-controlled vector (IQ) modulating signal synthesizer. Offering a wide 300 kHz to 8 GHz frequency range, fast settling and programmable phase, frequency and amplitude make this unit suitable to a wide range of applications and with low cost, small footprint.
Promotion: Supplied with a free TA265 precision sleeved coaxial cable (30 cm 1.3 dB @ 13 GHz)
The PicoSource PG900 Series are low-jitter triggered differential USB pulse generators. Pulse outputs are optimized for broad spectral content (fastest transition time) to best suit spectral and time-domain transmission and reflectometry measurements.
The PicoSource PG900 Series are low-jitter triggered differential USB pulse generators. Pulse outputs are optimized for broad spectral content (fastest transition time) to best suit spectral and time-domain transmission and reflectometry measurements.
The Pico Technology PicoVNA 106 is a professional USB-controlled, laboratory grade vector network analyser VNA of unprecedented performance, portability and affordability. Small in size to allow portability and low cost, the instrument boasts a ‘Quad RX’ four-receiver architecture to eliminate the uncorrectable errors, delays and fragility of three-receiver designs with internal transfer switches.
Now available the new PicoVNA 108 offers 300 kHz to 8.5 GHz operation with an exceptional dynamic range of 124 dB at 10 Hz (118 dB for the PicoVNA 106.
Call our application engineers on 01582 764334 to discuss your application or arrange a demo.
The NEW Pico Technology PicoVNA 108 is a professional USB-controlled, laboratory grade vector network analyser VNA of unprecedented performance, portability and affordability. Small in size to allow portability and low cost, the instrument boasts a ‘Quad RX’ four-receiver architecture to eliminate the uncorrectable errors, delays and fragility of three-receiver designs with internal transfer switches.
The PicoVNA 108 offers 300 kHz to 8.5 GHz operation with an exceptional dynamic range of 124 dB at 10 Hz (118 dB for the PicoVNA 106)
Additional Features:
Call our application engineers on 01582 764334 to discuss your application or arrange a demo.
The PT-104 screw terminal adaptor is an accessory for the PT-104 platinum resistance data logger.
The Pico Technology TA018 current probe can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current.
TA050 Attenuator set: 3-6-10-20 dB, 1 GHz 50 Ω 1 W BNC (m-f)
Pico Technology presents a unique Inline Probing System – the TETRIS® active probe. The unique design of the TETRIS active probe allows for contact to adjacent square pins in 2.54 mm pitch simultaneously. This is possible due to the probe's T-shaped housing allowing many probes to be positioned next to each other, permitting multiple measurements to be taken at the same time.
The TA133 is a high-impedance passive probe with 500 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA133 has been compensated to ensure optimal performance with the PicoScope 6404 oscilloscopes.
The Pico Technology TA138 is a current clamp for AC-only current measurements. Its single range is capable of measurements from 0.1 A to 200 A. Ideally suited for use with the PicoLog CM3. Fitted with 4 mm (banana) plug type connectors.
The Pico Technology TA150 is a high-impedance passive probe with 350 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA150 has been compensated to ensure optimal performance with the PicoScope 6402 and 6403 oscilloscopes.
The Pico Technology TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000 A.
The Pico Technology TA189 30 A high-precision current probe is for applications requiring non-intrusive current measurement, using closed-loop Hall effect technology to measure both AC and DC current with high stability over long periods of time.
Pico Technology presents a unique Inline Probing System – the TETRIS® active probe. The unique design of the TETRIS 1500 active probe allows for contact to adjacent square pins in 2.54 mm pitch simultaneously. This is possible due to the probe's T-shaped housing allowing many probes to be positioned next to each other, permitting multiple measurements to be taken at the same time.
Pico Technology presents a unique Inline Probing System – the TETRIS® active probe. The unique design of the TETRIS 2500 active probe allows for contact to adjacent square pins with 2.54 mm pitch simultaneously. This is possible due to the probe's T-shaped housing, which allows many probes to be positioned next to each other and multiple measurements to be taken at the same time.
The Pico Technology TA325 is a 3-phase AC current probe utilizing the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors.
The Pico Technology TA325 is a 3-phase AC current probe utilizing the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors.
Dual-break torque wrench SMA / PC3.5 / K-type. The torque wrench ensures repeatable tightening to 1Nm (8.85 in/lb) ± 5% and ensures all connectors are not overtightened to prevent damage.
Dual-break torque wrench with N-type connector. The torque wrench ensures repeatable tightening to 1Nm (8.85 in/lb) ± 5% and ensures all connectors are not overtightened to prevent damage.
The Pico Technology TA375 is a passive switchable oscilloscope probe, with a probe bandwidth of 100 MHz.
Low cost 100MHz oscilloscope suitable for use with Picoscopes and any other brand oscilloscope.
Sold as a pack of two probes, the Pico Technology TA375 is a passive switchable oscilloscope probe, with a probe bandwidth of 100 MHz.
The Pico Technology TA386 is a passive switchable oscilloscope probe, with a probe bandwidth of 200 MHz.
The kit includes the following items:
The kit includes the following items:
This oscilloscope demo board is well-suited for educational purposes and serves as an excellent guide for everyone from beginners, complete with a comprehensive primer on oscilloscope fundamentals, to the more advanced seasoned users of test instrumentation.
The new Pico Technology 5GHz SXRTO (Sampler eXtended Real Time Oscilloscope) is the first oscilloscope to combine the benefits of real-time sampling, equivalent-time sampling and high analogue bandwidth. The 9404-5 delivers an impressive 5GHz real time, 4 channel oscilloscope at 12 Bit vertical resolution.
Pulse, Eye Diagram and Mask Testing to defined standards at 70 ps or 3 Gb/s as standard.
