Pico Technology TA018 60 A AC/DC current probe, BNC
The Pico Technology TA018 current probe can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current.
The Pico Technology TA018 AC/DC mA Current Clamp is a transducer which will allow your multimeter to measure low electrical or/and electronic current up to 60 amperes AC/DC, with a frequency response up to 20kHz. When measuring current with this clamp, there is no need to break a circuit or to disturb the insulation. The extended measurement jaws allow for performing measurements in a narrow space. When measuring DC, a simple operating push button is designed for zero adjustment. The clamp adaptor applies to leakage detection or monitoring.
| Input ranges (DC) | Low (1 mV / 10 mA): 10 mA to 20 A High (1 mV / 100 mA): 100 mA to 60 A |
| Input ranges (AC RMS) | Low (1 mV / 10 mA): 10 mA to 20 A High (1 mV / 100 mA): 100 mA to 60 A |
| AC frequency range | Up to 20 kHz |
| Maximum conductor size | 9 mm |
| Output connectors | BNC |
| Operating environment | 0 ° C to 50 ° C, 70% RH |
| Dimensions | 195 mm x 70 mm x 33 mm |
| Battery type | 9 V DC NEDA 1604, 6F22, 006P |
| Battery life | 100 hours typical with alkaline |
Full specifications including accuracy can be found in the downloadable user's guide.
PicoTech TA018 Operator Manual
PicoScope Software 6 Beginners Guide
An Introduction to PC Oscilloscopes
Choosing the right Pico Technology active differential probe
| Photo | Product | SKU | |
|---|---|---|---|
 | Pico Technology TA041 25MHz 700V Active Differential Probe | - | > |
 | Rigol RP1025D High Voltage Differential Probe, DC-50MHz, 1400Vpp | - | > |
 | Rigol RP1100D High Voltage Differential Probe, 100MHz BW, 7000Vpp max | - | > |
 | Pico Technology TA325 30/300/3000A AC 3-Phase Flex Current Probe, BNC Connector | - | > |
 | AIM-TTi I-prober 520 Positional Current Probe, 5MHz, 20A | - | > |
 | Rigol RP1002C Current Probe 100A Peak, 1 MHz Bandwidth | - | > |
 | Rigol RP1001C Current Probe 100A Peak, 300 kHz Bandwidth | - | > |
 | Pico Technology TA488 AD2201 200 MHz Active Differential Probe, BNC | - | > |
 | Pico Technology TA489 AD2801 800 MHz Active Differential Probe, BNC | - | > |