Sumix WIZ-QS-110 Interferometer
- Single fibre inspection
- Autofocus
- PASS/FAIL verdict
- Industry standards
- Fast measurement
- Connects to tablet or laptop
WIZ-QS-110 is an automated interferometer for inspection of single fibre connectors, ferrules and bare fibre. The WIZ-QS-110 was designed as a basic solution for interferometric inspection of fibre optic connectors in high-volume production environment, where speed, simplicity and precision matter the most.
Whitelight measurement algorithm and precision-aligned fixtures not requiring frequent calibration make it stand out from the competition in the same category of products.
Note: WIZ-QS-110 is an upgraded model of WIZ-QS+ interferometer, retaining all its benefits.
Suitable for volume production
Save time with easy ferrule/connector insertion and fixture handling.
Autofocus
Minimise operator’s actions to just one click.
Interactive 2D and 3D surface profiles
Rotate, zoom, scale images to explore surface details as small as 2.5 μm.
Fast measurements
Measure single fibre connectors and ferrules as quickly as 1.3 seconds with USB 3.0 SuperSpeed connection.
One-click operation
Save time testing large quantities of connectors in Express Mode.
Industry-leading MaxInspect™ automated inspection software
Measure radius of curvature, apex offset, fiber height, core dip, etc.
Factory precision-aligned fixtures
Be free of the necessity to calibrate your fixtures before each use or when changing between fixtures.
Wide range of applications
Inspect single fiber connectors, ferrules, bare fibre, Arinc, MS termini, both PC and APC.
Compliance to industry standards
Test per IEC, Telcordia or your own Pass/Fail criteria.
More than 1000 micron scan range for fibre height
Accurately inspect ferrule surfaces with large discontinuities and special connectors.
Data-base connectivity
Store measurement data from all local sites in one place and easily integrate Sumix equipment into your manufacturing systems.
WIZ-QS-110 interferometric system includes:
- WIZ-QS-110 interferometer
- Optical flat standard for device verification
- USB 3.0 cable
- AC adapter
- Case
- MaxInspect™ software license
Fixtures and other accessories should be ordered separately.
| System | |
| Field of view: | 1.2 x 0.9 mm |
| Optical resolution: | 2.5 µm |
| Best suitable for connectors/ferrules (PC and APC): | ST, FC, SC, MU, LC, E2000™, Arinc, MS termini - PC and APC, bare fiber |
| Measurement mode: | phase shift and white light |
| Scanning and calculation speed: | 1.3 sec* *64 MHz, standard single fiber connector. |
| Microscopy Mode: | No |
| Maximum image size: | 2590 × 1940 px |
| Magnification: | 460× |
| Power supply: | external, USB 3.0 cable, 12 V DC power adapter |
| Weight: | 3.9 kg (8.6 lbs) |
| Dimensions (H × W × L): | 150 × 120 × 90 mm (5.9 × 4.72 × 3.5 in) |
| Focus: | autofocus |
| Focus range: | ±1 mm |
| Measurement Range: | ROC (mm): 1 to flat Apex offset (μm): 0 to 2000 Fiber height* (μm): more than 1000** Angles measurements - full range (degrees): 0 to 28*** * Difference from the highest and lowest points of the scanned object. **<100 µm available by default. >100 µm - for special connectors/tasks (software adjustment required). *** Regular fixtures - 0, 8, 9 degrees. Customized fixtures - 0 -28 degrees. |
|
Repeatability C.F.*:
* Values were calculated from 30 consecutive measurements without interaction on connector between measurements (connector fixed) and represent one sigma value. |
ROC: 0.2 % Fibre Height: 0.4 nm Angles: 0.0002 deg Apex Offset: 0.02 µm |
| Repeatability C.R.*: * Values were calculated from 30 consecutive measurements with removing and inserting connector between measurements (connector reloaded) and represent one sigma value. |
ROC: 0.2 % Fibre Height: 0.5 nm Angles: 0.007 deg Apex Offset: 1.1 µm |
| System requirements | |
| Recommended | Windows 10 Intel Core i7 4GB RAM or higher Built-in Intel USB 3.0 controller Microsoft Excel 2010 or higher |
Sumix WIZ-QS-110 Interferometer Datasheet 
