IntraAction DE Series Acousto-Optic Deflector Driver
The Model DE Series Deflector Drivers include a voltage-controlled RF oscillator and a broadband RF power amplifier in a housing with power supply, RFI line filter, and line switch.
An optional analogue amplitude modulation circuit is available. Standard frequency linearity is "0.25 percent. Standard frequency slew rate is 1 :sec for total frequency range. RF output power capability can be up to 10 watts for some models. Configuration options include a front panel user accessible connection between the voltage-controlled oscillator and level/modulation circuit (H) so that an external source frequency can be used in place of the internal voltage-controlled oscillator.
Also available is an optional front panel connection between the level/modulation circuit and the RF power amplifier (N) to give the Model DE drivers capability to be used as a standalone RF power amplifier. Drivers with option E provide a cw +10 dBm voltage-controlled oscillator RF reference output.
|
SPECIFICATIONS |
|||||
|
Frequency Control Voltage |
Analog (1 volt peak-to-peak) |
||||
|
Frequency Slew Rate |
1μs (total frequency range) |
||||
|
RF Amplifier Operation |
Class AB |
||||
|
Rise/Fall Time (modulation option) |
30 ns |
||||
|
Harmonics (at full power) |
-20 dBc |
||||
|
Output Mismatch Tolerance |
100% |
||||
|
Input / Output Impedance |
50 ohms |
||||
|
Line Voltage (standard) |
115/230 Vac, 50-60 Hz 100 Vac, 50-60 Hz (option J) |
||||
|
Size (inches) |
9.0 W x 3.5 H x 13.5 D |
||||
|
(cm) |
22.9 W x 8.9 H x 34.3 D |
||||
|
MODEL |
DE-40 |
DE-405 |
DE-80 |
DE-1002 |
DE-1502 |
|
Center Frequency1 |
40 MHz |
40 MHz |
80 MHz |
100 MHz |
150 MHz |
|
Frequency Range |
20 MHz |
20 MHz |
40 MHz |
50 MHz |
100 MHz |
|
RF Output Power Capability |
2 Watts |
5 Watts |
2 Watts |
2 Watts |
2 Watts |
OPTIONS:
D Inverse digital, input<0.8 volts for RF/on, input>2 volts to 5 volts for RF off, 50 ohm input impedance.
E Low level oscillator RF output, +10 dBm level.
H Front panel access between oscillator and modulator circuit.
J 100 Vac line voltage for Japan.
M Amplitude modulation (0-1 volt for 0 to specified RF output)
N Front panel access between modulator circuit and RF power amplifier.
T Digital input, input<0.8 volts for RF/off, input>2 volts to 5 volts for RF/on, 50 ohm input impedance.
1Other frequencies available.
OEM drivers available - please contact us with your requirements
MODEL DE SERIES Datasheet | Photo | Product | SKU | |
|---|---|---|---|
 | IntraAction ME Series Modulator Driver | - | > |
 | IntraAction GE Series High Power Acousto-Optic Modulator Driver | - | > |
 | IntraAction VFE Series Variable Frequency Source | - | > |
 | IntraAction DFE-A4 Series Dual Frequency Source | - | > |
 | IntraAction QE Series Acousto-Optic Q-Switch Driver | - | > |
 | IntraAction PA-4 RF Power Amplifier | - | > |
 | IntraAction PA Series High Power RF Power Amplifier | - | > |