Lambda News

CO2 Electroreduction CO2 electroreduction is a promising technology that uses intermittent renewable electricity and CO2 emissions to product fuels (e.g. methanol) and other economically relevant products (e.g. syngas). One of the great promises of this technology is to recycle the CO2 produced by factories, reducing CO2 emissions and its impact to climate change. In order for CO2 electroreduction to play...

Obtaining connector-level insertion loss (IL) and return loss (RL) for hybrid cables is complicated by the different connector types on either end of the cable. Hybrid cables cannot simply be flipped to test the reverse direction when the reference and device under test (DUT) connectors are no longer compatible. A test setup comprised of the OP940 IL and RL Meter...

Fibre patch cables, also known as patch cord or jumper cables, are fibre optic cables that are terminated with connectors on both ends. When the connector types on each end are different, the cable is aptly dubbed a HYBRID CABLE. These hybrid cables can serve to link otherwise incompatible infrastructure in existing fibre systems, such as those found in networks...

OptoTest is pleased to announce the release of new adapters for testing duplex LC (including unibody), 16f MTP, and CS connectors. With these adapters, insertion loss and return loss are tested across all fibres of the connectors without the need for moving or sliding the adapter. The new adapters were designed for the OP-SPHR Integrating Sphere to expand the testing...

Lambda Photometrics has been appointed the technical distributor for VSPARTICLE in the UK and Ireland in support of the growth in the production and use of nanoparticles for a wide variety of applications. The nano particle generator, sizer and deposition chambers can be used to rapidly produce consistent materials at ambient temperatures without the need for highly complex processes. Ian...

Today, the accessory industry for newborns and infants is a dynamically developing business sector. Manufacturers compete to invent increasingly sophisticated and creative products designed to help young parents in caring for their children. Among the many colourful and often unnecessary products, there are exceptional products that are designed to really help and support parents to create normality where it’s not...

Pico Technology have launched their latest 5 GHz SXRTO Sampler Extended Real Time Oscilloscope, but what is SXRTO. Learn more about the benefits and cost savings compared to Real Time Oscilloscopes, RTO below. The real-time oscilloscope Real-time oscilloscopes (RTOs) are designed with a high enough sampling rate to capture a transient, non-repetitive signal with the instrument’s specified analogue bandwidth. According...

The NEW Rigol Technologies MSO8000 Series of oscilloscopes combine best in class sampling (10 GSa/sec) and memory depth (500MPts) with a modern, flexible User Interface enabled by their new UltraVision II architecture and innovative Phoenix Chipset. Three models available from 600 MHz to 2GHz, each with 4 analogue channels, and MSO ready the 8000 Series brings innovative analysis and visualisation...

Precise, reliable, characterisation of thin film topography and thickness, and substrate topography. Thin transparent thin films are critical across a variety of markets and applications, including consumer electronics, semiconductors and optics. Precise monitoring and control of thin film processes is achieved by measuring top surface, thickness, and substrate surface characteristics – all of which are enabled by multiple thin film measurement and...

3D technologies are becoming more and more boldly entering modern enterprises to prove themselves in other industries, departments, and fields. The most modern technological solutions are present in our homes, workplaces, and means of transport and are slowly becoming our everyday life. However, we are not always aware of how much modern technology contributes to the creation of products that...