YIC Technologies EMProbe EMC Scanner
Accurate and repeatable high-resolution EMC and EMI diagnostics with hand held Near Field Probes on your lab bench the EMProbe allows EMC scanner of your circuit with reliable and repeatable accuracy to give a graphical representation of EMC issues in a matter of minutes. The software allows for a visual comparison of before/after to show how board changes have improved the circuit design. This is an invaluable tool for all EMC pre-compliance engineers.
Accurate and repeatable high-resolution EMC and EMI diagnostic with hand held Near Field Probes on your on your lab bench. Using hand held probes to identify and resolve EMC/EMI issue testing have never been this accurate and straight forward!
3D precision technology used to assist high density board designers to use off the shelf hand-held probes and visualise the root causes of potential EMC and EMI problems during pre and post EMC compliance testing.
EMProbe enables the PCB and Design Engineers to diagnose EMC/EMI problems using regular off the shelf hand-held probes. An easy to use robotic arm controls the movement of the probe to any direction and an external spectrum analyser provides the results. The EMViewer software is used to control the robotic arm and the external spectrum analyser collects and analyse the results.
Different types of robotic arms can be used, based on the desired size and resolution.
Capability:
Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation and notes.
Spatial scan time:
Continuous real-time for entire scan area (1,218 probes activated) when Level 1 selected: 5 sec.
Selected area 2.25 cm x 2.25 cm, 9 probes activated.
Level 1: <0.5 sec. | Level 2: 4 sec. | Level 3: 9 sec. | Level 4: 21 sec. | Level 5: 55 sec. | Level 6: 2 min 35 sec. | Level 7: 7 min 23 sec. | Level 8: 24 min 00 sec.
Spectral scan time:
11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span and RBW are user selectable within spectrum analyser specifications
Supported operating systems:
Windows 10®
Supported overlays:
Picture in JPEG format
Standard Gerber© RS274x format and HPGL format CAD files
| Broadband frequency coverage | Dependent on spectrum analyser and the probe performance |
| Measurement sensitivity | Dependent on spectrum analyser and the probe performance |
| Spatial resolution | Base version 7.5 mm, High Resolution 0.4 mm |
| Scan area | 300 mm Radius |
| Scan height (max) | 150 mm Radius |
| Frequency accuracy of peaks | Peak marking accuracy of spectrum analyser |
| Probe to probe uniformity | Dependent on the selected probe |
| Maximum radiated power load | Dependent on spectrum analyser and the probe performance |
| Operating temperature | From 15⁰ C to 40⁰ C (continuous spectral and spatial scans at 50 MHz) |
| NET Weight | 3.40 Kg (excluding cables and the adaptor) |
YIC EMProbe Datasheet 
