Beehive 135A RF Helmholtz Coil
The Beehive Electronics 135A RF Helmholtz coil generates a well-controlled, uniform magnetic field. It can be used to calibrate magnetic field probes, such as the Beehive 100 series, or for testing the susceptibility of devices to magnetic fields.
- Allows the user to calibrate magnetic fields sensors or to subject test samples to controlled, repeatable magnetic fields
- Wide bandwidth allows operation up to 30 MHz
- Includes fixtures for use in calibration 100A, 100B, 100C probes
- Mounting features provided for user-supplied fixtures allow calibration or measurement of many devices
- Designed for use with standard 50-ohm signal sources
The Beehive Electronics 100 series EMC probes are designed for identifying and fixing EMC problems. The loop probes have integrated electrostatic shields, providing isolation from commonmode signals. As a result, these probes deliver excellent repeatability. The different probe shapes and loop sizes allow the user to select the optimum probe for a given frequency, providing the optimum sensitivity and spatial resolution.
The 100D stub probe, with its narrow tip, offers the highest spatial resolution. It is ideally suited to tasks such as tracking EMC sources down to the individual pins of an IC. Because of the planar construction of the probes, even the large loops are only 0.11” thick, allowing the probe to be inserted into narrow seams and gaps.
Beehive Electronics 100 Series EMC Probe Datasheet
Beehive Electronics 135A Datasheet
Beehive Electronics 135A Manual
Beehive Electronics 150A Datasheet